Nullamlacus dui ipsum

Nullamlacus dui ipsum conseque loborttis non euisque morbi penas dapibulum orna. Urnaultrices quis curabitur phasellentesque congue magnis vestibulum quismodo nulla et feugiat. Adipisciniapellentum leo ut consequam ris felit elit id nibh sociis malesuada.

Continue Reading »

Teachers Login Here

Teachers Login Form

 

Pupils Login Here

Pupils Login Form

 



Publications

Journal Papers Published or Accepted

 

  1. Muhammad Tanveer and Jean Zu, "Nonlinear vibration of hyperelastic axisymmetric solids by a mixed p-type method International Journal of Non-Linear Mechanics", International Journal of Nonlinear Mechanics, accepted.
  2. Hansong Xiao, Wuwei, and Jean Zu, "Hierarchical Control of Automotive Electric Power Steering System and Anti-lock Brake System: Theory and Experiment", International Journal of Vehicle Design, accepted.
  3. H.E.U. Ahmed, R. Banan, J.W. Zu, A. Bazylak, 2011, "Free Vibration Analysis of a Polymer Electrolyte Membrane Fuel Cell", Journal of Power Sources, 196, pp. 5520-5525.
  4. Minghui Yao, Wei Zhang, Jean W. Zu, "Multi-pulse Heteroclinic Orbits and Chaotic Motions in a Parametrically Excited Viscoelastic Moving Belt", International Journal of Bifurcation and Chaos, accepted.
  5. Minghui Yao, Wei Zhang, Jean W. Zu, 2012, "Multi-pulse Chaotic Dynamics in Non-planar Motion of Parametrically Excited Viscoelastic Moving Belt", Journal of Sound and Vibration, 331, pp. 2624-2653.
  6. Petru Scurtu, Mike Clark, and Jean Zu, 2012, "Coupled longitudinal and transverse vibration of automotive belts under longitudinal excitations using analog equation method", Journal of Vibration and Control, doi:10.1177/1077546312439430.
  7. Ming Jia, Jean Zu, and Alireza Hariri, 2011, "New Tissue Resonator Indenter Device and Reliability Study", Sensors, 11(1), pp.1212-1228.
  8. H. S. Xiao, W. W. Chen, H. Zhou and J. W. Zu, 2010, "Integrated Control of Active Suspension System and Electronic Stability Program Using Hierarchical Control Strategy: Theory and Experiment", Vehicle System Dynamics, 49, No. 1&2, pp.381-397.
  9. Pinhas Ben-Tzvi, Andrew A. Goldenberg and J.W. Zu, 2010, "Articulated Hybrid Mobile Robot Mechanism with Compounded Mobility and Manipulation and on-Board Wireless Sensor/Actuator Control Interfaces", Mechatronics, 20(6), pp.627-639.
  10. Xiao-Dong Yang, Li-Qun Chen and Jean W. Zu, 2010, "Vibrations and Stability of an Axially Moving Rectangular", ASME Journal of Applied Mechanics, 78, pp.011018-1---011018-11.
  11. H. S. Xiao and J. W. Zu, 2010, "Evolutionary Multiobjective Optimization of Cam Profile for a New Cam Drive Engine", International Journal of Vehicle Design, 53(3), pp. 198-219.
  12. Peyman Honarmandi, Jean Zu and Kamran Behdinan, 2010, "Analytical Study and Design Characteristics of Scratch Drive Actuoators", Sensors and Actuators A: Physical, 160(1-2), pp. 116-124.
  13. Alireza Hariri and Jean W. Zu, 2010, "Design of a Tissue Resonator Indenter Device for Measurement of Soft Tissue Viscoelastic Properties", International Journal of Biomechatronics and Biomedical Robotics, 1(2), pp.104-114.
  14. H. S. Xiao and J. W. Zu, 2010, "Evolutionary Multi-objective Optimisation of Cam Profile for a New Cam Drive Engine", International Journal of Vehicle Design, 53(3), pp.198-219.
  15. Qiming Pang, Jean Zu, Geoffrey M Siu and Ren-Ke Li, 2010, "A Uniaxial Cyclic Stretch Apparatus Affected Cell Proliferation and Cell Orientation", International Journal of Biomechatronics and Biomedical Robotics, 1(2), pp.79-87.
  16. Qiming Pang, Jean W. Zu, Ren-Ke Li and Geoffrey Siu, 2010, "Design and Development of A Novel Biostretch Apparatus For Cardiac Tissue Engineering", ASME Journal of Biomechanical Engineering, 132, pp. 014503-1-4.
  17. X.D. Wang and J. W. Zu, 2009, "On the nonlinear mechanical behaviour of circular dielectric elastomer films under large deformation", Journal of Mechanics and MEMS, 1, pp. 323-334.
  18. Hansong Xiao and Jean W. Zu, 2009, "Cam profile optimization for a new cam drive", Journal of Mechanical Science and Technology, 23(10), pp. 2592-2602.
  19. Gong Cheng and Jean W. Zu, 2009, "Dynamics of a 2-DOF Dry Friction System under Two-Frequency Excitations", International Journal of Applied Mechanics, 1(4), pp. 647-665.
  20. Li-Qun Chen, Wei Zhang and Jean W. Zu, 2009, "Nonlinear Dynamics for Transverse Motion of Axially Moving Strings", Chaos, Solitons & Fractals, 40(1), pp. 78-90.
  21. Pinhas Ben-Tzvi, Andrew A. Goldenberg and Jean W. Zu, 2008, "Design and Analysis of a Hybrid Mobile Robot Mechanism with Compounded Locomotion and Manipulation Capabilities", ASME Journal of Mechanical Design, 130(7), pp.072302-1--072302-13.
  22. Qiuzhen Qu and Jean Zu, 2008, "On Steering Control of Commercial Three-Axie Vehicle", ASME Journal of Dynamic Systems, Measurement and Control, 130, pp.92-102.
  23. Wei Zhang and Jean W. Zu, 2008, "Transient and steady nonlinear responses for a rotor-active magnetic bearings system with time-varying stiffness", Chaos, Solitons and Fractals, 38(4), pp.1152-1167.
  24. W. Zhang, J. W. Zu and F. X. Wang, 2008, "Global bifurcations and chaos for a rotor-active magnetic bearing system with time-varying stiffness", Chaos, Solitons and Fractals 35, pp.586-608.
  25. Li-Qun Chen and Jean W. Zu, 2008, "Solvability condition in multi-scale analysis of gyroscopic continua", Journal of Sound and Vibration, 309(1-2), pp. 338-342.
  26. Peyman Honarmandi, Jean W. Zu and Kamran Behdinan, 2007, "Reliability Based Design Optimization of Cantilever Beams under Fatigue Constraint", AIAA Journal, 45(11), pp. 2737-2746.
  27. Alireza Hariri, Jean Zu and Ridha Ben Mrad, 2007, "Modeling of Wet Stiction in Microelectromechanical Systems (MEMS)", IEEE/ASME Journal of Microelectromechanical Systems, 16(5), pp.1276-1285.
  28. A. Elmarakbi and J. Zu, 2007, "Incremental Harmonic Balance Method for Analysis of Standard/Smart Vehicles-to-Rigid Barrier Frontal Collision." International Journal of Vehicle Safety, 2(3), pp. 288-315.
  29. A. Elmarakbi and J. Zu, 2007, "Mathematical Modeling of Vehicle Crash with Emphasis on the Dynamic Response Analysis of Extendable Cubic Nonlinear Dampers Using IHBM." Proceeding of the IMechE Part D: Journal of Automobile Engineering, 221, pp.143-156.
  30. Parag R. Dhar and Jean W. Zu, 2007, "Design of a Resonator Device for in-Vivo Measurement of Regional Tissue Viscoelasticity", Sensors & Actuators A: Physical, 133(1), pp. 45-54.
  31. Natalie Baddour and Jean W. Zu, 2007, "Nonlinearly Coupled in-plane and Transverse Vibrations of a Spinning Disk", Applied Mathematical Modelling, 31(1), pp.54-77.
  32. A. Hariri, J. W. Zu and R. Ben Mrad, 2006, "n-Point Asperity Model for Contact Between Nominally Flat Surfaces", ASME Journal of Tribology, 128(3), pp. 505-514.
  33. Ali Hariri, Jean W. Zu and Ridha BenMrad, 2006, "Modeling of elastic/plastic contact between nominally flat rough surfaces using an n-point asperity model", ASME Journal of Tribology, 128(4), pp. 876-885.
  34. Ali Hariri, Jean W. Zu and Ridha BenMrad, 2006, "Modeling of Dry Stiction in Micro Electro-Mechanical Systems", Journal of Micromech. Microeng, 16(7), pp. 1195-1206.
  35. A. Elmarakbi and J. Zu, 2006, "Crash Analysis and Modeling of Two Vehicles in Frontal Collisions using Two Types of Smart Front-End Structures: An Analytical Approach using IHBM." International Journal of Crashworthiness, 11, No. 5, pp. 467-483.
  36. Mohammad Biglarbegia and Jean W. Zu, 2006, "Tractor-Semitrailer Model for Vehicles Carrying Liquids", Vehicle System Dynamics, 44, pp. 871 - 885.
  37. Natalie Baddour and Jean W. Zu, 2006, "Time-Averaged Canonical Perturbation of Nonlinear Vibrations of a Spinning Disk", Nonlinear Analysis: Real World Applications, 7(3), pp. 319-340.
  38. Wuwei Chen, Hansong Xiao, Liqiang Liu and Jean W. Zu, 2006, "Integrated Control of Automotive Electrical Power Steering and Active Suspension Systems based on random sub-optimal control", International Journal of Vehicle Design, 42(3-4), pp. 370-391.
  39. Li-Qun Chen, Hao Chen and Jean W. Zu, 2006, "Equilibrium and bifurcation of varying cross-section microcantilevers subject to the atomic force", Chaos, Solitons & Fractals, 28(5), pp. 1159-1164.
  40. Zhao Weijia, Chen Liqun and Jean W. Zu, 2006, " A finite difference method for simulating transverse vibrations of an axially moving viscoelastic string", Applied Mathematics and Mechanics, 27(1), pp.23-28.
  41. Gong Cheng and Jean W. Zu, 2005, "A numerical study of a dry friction oscillator with parametric and eternal excitations", Journal of Sound and Vibration, 287(1-2), pp. 329-342.
  42. Ahmed Elmarakbi and Jean Zu, 2005, "The Effects of Extendable Hydraulic Dampers on Vehicle Crashworthiness in Various Collision Events", Transaction of Society of Automotive Engineers in Japan, 36(6), pp. 193-198.
  43. Ahmed Elmarakbi and Jean Zu, 2005, "Crashworthiness Improvement of Vehicle-to-Rigid Fixed Barrier in Full Frontal Impact using Novel Vehicle's Front-End Structures", International Journal of Automotive Technology, 6(5), pp.491-499.
  44. Qiuzhen Qu and Jean W. Zu, 2005, "Variable Structure Model Following Control of Four-Wheel-Steering Vehicle", International Journal of Vehicle Design, 37(4), pp.291-310.
  45. Peyman Honarmandi, Jean W. Zu and Kamran Behdinan, 2005, "Elasto-Plastic Fatigue Life Improvement of Bolted Joints and Introducing FBI Method", Mechanics Based Design and Structures and Machines, 33, pp.311-330.
  46. Wei Zhang, Feng-xia Wang and Jean W. Zu, 2005, " Local bifurcations and codimension-3 degenerate bifurcations of a quintic nonlinear beam under parametric excitation", Chaos, Solitons & Fractals, 24(4), pp.977-998.
  47. Li-Qun Chen, Wei-Jia Zhao and Jean W. Zu, 2005, "Simulations of transverse vibrations of an axially moving string: a modified difference approach", Applied Mathematics and Computation, 166(3), pp. 596-607.
  48. Qiuzhen Qu, Jean W. Zu and Gong Cheng, 2004, "Adhesion-Related Failure Models for Scratch Drive Actuators", Journal of Micromechanics and Microengineering, 14(10), pp.1405-1410.
  49. Wei Zhang, Fengxia Wang and Jean W. Zu, 2004, "Computation of Normal Forms for High Dimensional Nonlinear Systems and Application to Nonplanar Nonlinear Oscillations of a Cantilever Beam", Journal of Sound and Vibration, 278(4-5), pp.949-974.
  50. Li-Qun Chen, Wei-Jia Zhao and Jean W. Zu, 2004, "Transient responses of an axially accelerating viscoelastic string constituted by a fractional differentiation law", Journal of Sound and Vibration, 278, pp.861-871.
  51. Li-Qun Chen and Jean W. Zu, 2004, "Energetics and conserved functional of axially moving materials undergoing transverse nonlinear vibration", ASME Journal of Vibration and Acoustics, 126(3), pp. 452-455.
  52. Liqun Chen, Jean W. Zu and Jun Wu, 2004, "Principal resonance in transverse nonlinear parametric vibration of an axially accelerating viscoelastic string", Acta Mechanica Sinica, 20(3), pp. 307-316.
  53. Ahmed Elmarakbi and Jean Zu, 2004, "Dynamic Analysis of Smart Structures for Vehicle-to-Vehicle Frontal Collision Alleviation", The Transaction of Society of Automotive Engineers in Japan, JSAE Transaction, 35, pp.151-156.
  54. Ahmed M. Elmarakbi and Jean W. Zu, 2004, "Dynamic Modeling and Analysis of Smart Vehicle Structures for Frontal Collision improvement", International Journal of Automotive Technology, IJAT, 5, pp.247-255.
  55. Ahmed Elmarakbi and Jean Zu, 2004, "Vehicle to Vehicle Compatibility: Theoretical Foundation, Numerical and Optimization", The Transaction of Canadian Society of Mechanical Engineers, CSME Transaction, 28, pp.355-374.
  56. Gong Cheng and Jean W. Zu, 2004, "Non-stick and stick-slip motion of a coulomb-damped belt drive systems subjected to multi-frequency excitations", ASME Journal of Applied Mechanics, 70, pp.871-884.
  57. G. Cheng and J. W. Zu, 2004, "Dynamics of a Dry Friction Oscillator under Two-Frequency Excitations", Journal of Sound and Vibration, 275, pp. 591-603.
  58. Li-Qun Chen, Jun Wu and Jean W. Zu, 2004, "Asymptotic nonlinear behaviors in transverse vibration of an axially accelerating viscoelastic string", Nonlinear Dynamics, 35(4), pp.347-360.
  59. Y. Z. Liu and J. W. Zu, 2004, "Stability and bifurcation of helical equilibrium of thin elastic rod", Acta Mechanica, 167, pp. 29-39.
  60. Li-Qun Chen, Jun Wu and Jean W. Zu, 2004, "The chaotic response of the viscoelastic traveling string: an integral constitutive law", Chaos, Solitons and Fractals, 21(2), pp. 349-357.
  61. Li-Qun Chen, Jean W. Zu, Jun Wu and Xiao-Dong Yang, 2004, "Transverse vibrations of an axially accelerating viscoelastic string with geometric nonlinearity", Journal of Engineering Mathematics, 48(2), pp.171-182.
  62. Gong Cheng and Jean W. Zu, 2003, "Dynamic Analysis of an Optical Fiber Coupler in Telecommunications", Journal of Sound and Vibration, 268(1), pp. 15-31.
  63. Li-Qun Chen, Neng-Hui Zhang and Jean W. Zu, 2003, "The Regular and Chaotic Vibrations of an Axially Moving Viscoelastic String Based on Fourth-order Galerkin Truncation", Journal of Sound and Vibration, 261, pp.764-773.
  64. L.-Q. Chen, J. W. Zu and J. Wu, 2003, "Steady-state response of the parametrically excited axially moving string constituted by the Boltzmann superposition principle", Acta Mechanica, 162, pp.143-155.
  65. Li-Qun Chen and Jean W. Zu, 2003, "Parametric resonance of axially moving string with an integral constitutive law", International Journal of Nonlinear Science and Numerical Simulations, 4, pp.169-177.
  66. R. Ben Mrad, A. Abhari and J. Zu, 2003, "A Control Methodology for an Inchworm Piezomotor," Mechanical Systems and Signal Processing, Vol. 17(2), pp. 457-471.
  67. Nabeel Shabaneh and Jean W. Zu, 2003, "Nonlinear Dynamic Analysis of a Rotor Shaft System with Viscoelastically Supported Bearings", ASME Journal of Vibration and Acoustics, 125(3), pp. 290-298.
  68. Ahmed M. Elmarakbi and Jean W. Zu, 2003, "Numerical Analysis and Optimization of Vehicle Compatibility Using a Smart Vehicle Structure", Bodies and Structures, DOI:10.4271/2003-01-2802.
  69. J. W. Zu and Z. Ji, 2002, "An Improved Transfer Matrix Method for Steady State Analysis of Nonlinear Rotor Bearing Systems", ASME Journal Engineering for Gas Turbines and Power, 124, pp. 303-310.
  70. Gong Cheng and Jean W. Zu, 2002, "Two Frequency Forced Vibration under Coulomb and Viscous Frictions", ASME Journal of Vibration and Acoustics, 124(4), pp. 537-544.
  71. Zhichao Hou and Jean W. Zu, 2002, "Nonlinear Free Oscillations of Moving Viscoelastic Belts", Mechanism and Machine Theory, 37(9), pp.925-940.
  72. Li-Qun Chen, Neng-Hui Zhang and Jean W. Zu, 2002, "Bifurcation and chaos of an axially moving viscoelastic string", Mechanics Research Communications, 29(2-3), pp. 81-90.
  73. Lixin Zhang, Jean W. Zu and Z. Zhong, 2002, "Transient Response for Viscoelastic Moving Belts Using Block-by-Block Method", International Journal of Structural Stability and Dynamics, 2(2), pp. 265-280.
  74. Lixin Zhang, Jean W. Zu and Zhichao Hou, 2001, "Complex Modal Analysis of Non-self-adjoint Hybrid Serpentine Belt Drive Systems", ASME Journal of Vibration and Acoustics, 123(2), pp. 150-156.
  75. N. Baddour and J. W. Zu, 2001, "A revisit of Spinning Disk Model, Part I: Derivation of Equations of Motion", Applied Mathematical Modelling, 25, pp. 541-559.
  76. N. Baddour and J. W. Zu, 2001, "A revisit of Spinning Disk Model, Part II: Linear Transverse Vibration", Applied Mathematical Modelling, 25, pp. 561-578.
  77. Liqun Chen and Jean W. Zu, 2001, "Transverse Vibration of Axially Moving Strings and Its Control", Advance in Mechanics, 2001, 31(4), pp.535-546.
  78. Liqun Chen and Jean W. Zu, 2001, "Advance in Analysis of Vibrations of Serpentine Belt Drive Systems", Mechanics and Engineering, 23, pp. 8-12.
  79. Ray P.S. Han and Jean W. Zu, 2001, "The Influence of Combined Concentrated and Distributed Follower Forces on the Eigensolutions of a Spinning Beam", International Journal of Structural Stability and Dynamics, 1(2), pp. 263-282.
  80. L. Zhang and J. W. Zu, 2000, "One-to-one Auto-Parametric Resonance in Serpentine belt Drive Systems", Journal of Sound and Vibration, 232(4), pp. 783-806.
  81. T. Zhou, J. W. Zu and A. A. Goldenberg, 2000, "Modelling of Flexible Robot-Payload Systems Through Component Synthesis", ASME Journal of Dynamic Systems, Measurement, and Control, 122(2), pp. 381-385.
  82. F.P.J. Rimrott and J. W. Zu, 2000, "The Collinearity Principle Applied to a Gyrosatellite", Recent Advances in Applied Mechanics, NTU Athens, pp. 311-317.
  83. N. H. Shabaneh and Jean W. Zu, 2000, "Dynamic Analysis of Rotor-Shaft Systems with Viscoelastically Supported Bearings", Mechanism and Machine Theory, 35(9), pp. 1313-1330.
  84. Nabeel Shabaneh and Jean W. Zu, 2000, "Dynamic and Stability Analysis of Rotor-Shaft Systems with Viscoelastically Supported Bearings", Special Issue of Canadian Society for Mechanical Engineering, 24(1B), pp.179-189.
  85. Jean W. Zu and Lixin Zhang, 2000, "Two-To-One Internal Resonance In Serpentine Belt Drive Systems", International Journal of Nonlinear Sciences and Numerical Simulation, 1, pp. 187-198.
  86. Natalie Baddour and Jean W. Zu, 2000, "General Solution of the Forced In-plane Vibration Problem for a Spinning Disk", Special Issue of Canadian Society for Mechanical Engineering, pp. 307-321.
  87. Lixin Zhang and Jean W. Zu, 1999, "Nonlinear Vibration of Parametrically Excited Viscoelastic Moving Belts, Part I: Dynamic Analysis", ASME Journal of Applied Mechanics, 66, pp. 396-402.
  88. Lixin Zhang and Jean W. Zu, 1999, "Nonlinear Vibration of Parametrically Excited Viscoelastic Moving Belts, Part II: Stability Analysis", ASME Journal of Applied Mechanics, 66, pp. 403-409.
  89. L. Zhang and J. W. Zu, 1999, "Modal Analysis of Serpentine Belt Drive Systems", Journal of Sound and Vibration, 222(2), pp. 259-279.
  90. Jianbin Chen and Jean W. Zu, 1999, "A Theoretical Study of Vacuum Force on Gravity Foils and Step Foils", TAPPI Journal, 82, pp.93-98.
  91. L. Zhang, J. W. Zu and Z. Zheng, 1999, "The Stochastic Newmark Algorithm for Random Analysis of Multi-degree-of-freedom Nonlinear Systems", Computer & Structures, 70, pp.557-568.
  92. Edward Wong and Jean W. Zu, 1999, "Dynamic Response of a Coupled Spinning Timoshenko Shaft System Using Chebyshev Polynomials", ASME Journal of Vibration and Acoustics, 121, pp.110-113.
  93. Seeva Karunendiran, W.L. Cleghorn and Jean W. Zu, 1999, "Transverse Vibration of a Uniform Circular Thick Beam with Non-classical boundary Conditions", Journal of Sound & Vibration, 220, pp.186-191.
  94. Seeva Karunendiran and Jean W. Zu, 1999, "Free Vibration Analysis of Shafts on Resilient Bearings Using Timoshenko Beam Theory", ASME Journal of Vibration and Acoustics, 121, pp. 256-257.
  95. Zhenyi Ji and Jean W. Zu, 1998, "Method of Multiple Scales for Vibration Analysis of Nonlinear Rotor-Bearing Systems", Journal of Sound and Vibration, 218(2), pp. 269-305.
  96. Z. Ji and J. W. Zu, 1998, "Method of Multiple Scales for Vibration Analysis of Rotor-Shaft Systems with Nonlinear Bearing Pedestal Model", Journal of Sound and Vibration, 218(2), pp. 293-305.
  97. Jean W. Zu and Zhenyi Ji, 1998, "Steady State Response of Rotor Systems with Timoshenko Shaft and Nonlinear Bearings", ASME Journal of Engineering for Gas Turbine and Power, 120(4), pp.751-758.
  98. Jean W. Zu and John Melanson, 1998, "Natural Frequencies and Normal Modes for Externally Damped Spinning Timoshenko Beams with General Boundary Conditions", ASME Journal of Applied Mechanics, 65(3), pp.770-772.
  99. Lixin Zhang and Jean W. Zu, 1998, "Nonlinear Vibration of Viscoelastic Moving Belts, Part I: Free Vibration Analysis", Journal of Sound and Vibration, 216, pp.75-91.
  100. Lixin Zhang and Jean W. Zu, 1998, "Nonlinear Vibration of Viscoelastic Moving Belts, Part II: Forced Vibration Analysis", Journal of Sound and Vibration, 216(1), pp.93-105.
  101. J. Melanson and Jean W. Zu, 1998, "Free Vibration and Stability Analysis of Internally Damped Rotating Shafts with General Boundary Conditions", ASME Journal of Vibration and Acoustics, 120(3), pp.776-783.
  102. Degao Li, Jean W. Zu and Andrew A. Goldenberg, 1998, "Dynamic Modelling and Mode Analysis of Flexible-Link, Flexible-Joint Robots", Mechanism and Machine Theory, 33(7), pp.1031-1044.
  103. Degao Li, Andrew A. Goldenberg and Jean W. Zu, 1997, "A New Method of Peak Torque Reduction with Redundant Manipulators", IEEE Transactions on Robotics and Automation, 13(6), pp.845-853.
  104. K.O. Eneremadu and Jean W. Zu, 1997, "Stability of Steady State Two-Frequency Oscillations of a Cylindrical Shell", ASCE Journal of Engineering Mechanics, 123(10), pp.1034-1040.
  105. Ray P.S. Han and Jean W. Zu, 1995, "Pseudo Non Self-Adjoint and Non Self-Adjoint Systems in Structural Dynamics", Journal of Sound & Vibration, 184, pp.725-742.
  106. Jean W. Zu and Ray P.S. Han, 1994, "Dynamic Response of a Spinning Timoshenko Beam Subjected to a Moving Load with General Boundary Conditions", ASME Journal of Applied Mechanics, 61, pp. 152-160.
  107. Ray P.S. Han, Mike Xu and Jean W. Zu, 1993, "On the Kineto-Elasto Vibration of High Speed Mechanisms", International Journal of Mechanical Science, 35, pp.769-785.
  108. Ray P.S. Han and Jean Wuzheng Zu, 1993, "Analytical Dynamics of a Spinning Timoshenko Beam Subjected to a Moving Load", Journal of Franklin InstiŽtute, 330(1), pp.113-129.
  109. Jean Wu-Zheng Zu and Ray P.S. Han, 1992, "Natural Frequencies and Normal Modes of a Spinning Timoshenko Beam with General Boundary Conditions", ASME Journal of Applied Mechanics, 59(2S), S197-S204.
  110. Ray P.S. Han and Jean W. Zu, 1992, "Modal Analysis of Rotating Shafts-a Body-Fixed Formulation Approach", Journal of Sound & Vibration, 156, pp.1-16.
  111. Z.C. Zheng and Jean W. Zu, 1990, "Dynamic Reanalysis of Piled Offshore Platform Structures", Journal of Mechanical Strength, 1.

Refereed Conference Papers Published in Proceedings

  1. R. Dhote, R. Melnik, and J. Zu, "Dynamic Thermo-Mechanical Properties of Shape Memory Alloy Nanowires Upon Multi-Axial Loading", ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, September 18-21, 2011, Scottsdale, Arizona.
  2. Wei-Jiun Su, Armaghan Salehian, and Jean Zu, "Influence of Macro Fiber Composite (MFC) actuators on Thermally induced Wrinkles of Membranes", ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, September 18-21, 2011, Scottsdale, Arizona.
  3. Yang Zhu and Jean Zu, "Modeling Piezoelectric Beam Energy Harvester: A Comparison between Euler Bernoulli Theory and Timoshenko Theory", ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, September 18-21, 2011, Scottsdale, Arizona.
  4. M.H. Yao, W. Zhang and J. W. Zu, "Multi-Pulse Chaotic Dynamics of Three-Degree-of-Freedom Model for Iced Cable Structure", ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, August 28-31, 2011, Washington, DC, USA.
  5. Baoping Wen, Vahid Mashatan, and Jean Zu, "Design and Simulation of a Compact Electromagnetic Actuator for the Synchronized Segmentally Interchanging Pulley Transmission System (SSIPTS)", ASME/IEEE International Conference on Mechatronic and Embedded Systems and Applications (MESA2011), August 29-31, 2011, Washington, DC, USA.
  6. R. Farshidi, and J.W. Zu, "Studies of Belt Tension during shifts in a morphing pulley belt driven transmission system" ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE. August 29-31, 2011, Washington, DC, USA.
  7. Hansong Xiao and Jean Zu, "Development of a New Constrained Multiobjective Optimization Algorithm through Integrating Artificial Immune Systems and Stochastic Ranking", 4th International Conference on Experiments/Process/System Modeling/Simulation/Optimization (IC-EpsMsO), Athens, Greece, July 6-9, 2011.
  8. M.H. Yao, W. Zhang, J. W. Zu and Q. Wang, "Multipulse Chaotic Dynamics of the Laminated Composite Piezoelectric Shell", Canadian Congress of Applied Mechanics (CANCAM), June 6-9, 2011, Vancouver, Canada.
  9. R. Banan, J.W. Zu, A. Bazylak, "Vibration Behavior of Single PEM Fuel Cell for Stationary Applications", Canadian Congress of Applied Mechanics (CANCAM), June 6-9, 2011, Vancouver, Canada.
  10. R. Dhote, R. Melnik, and J. Zu, "Properties of Finite Shape Memory Alloy Nanowires and Dynamic Thermo-Mechanical Coupling", International Conference on Frontier Topics in Nanostructures and Condensed Matter Theory (NCMT), March 9-11, 2011 London, Ontario.
  11. R. Farshidi, V. Mashatan and J. W. Zu, "Variable stiffness tensioner for a belt driven transmission", ASME 2010 International Mechanical Engineering Congress & Exposition, November 12-18, 2010, Vancouver, BC, Canada.
  12. Rakesh P. Dhote, Roderick V.N. Melnik and Jean Zu, "Microstructures of constrained shape memory alloy nanowires under thermal effects", 2010 ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2010), September 28 - October 01, 2010, Philadelphia, Pennsylvania, USA.
  13. Hasnet Ahmed, Jean Zu and Aimy Bazylak, "Free vibration analysis of a PEMFC using the finite element method", 8th International Fell Cell Science, Engineering and Technology Conference, June 14-16, 2010, Brooklyn, New York, USA.
  14. Muhammad Tanveer and Jean W. Zu, "Dynamic analysis of hyperelastic axisymmetric solids by p-type mixed finite element method", 3rd International Conference on Dynamics, Vibration and Control, May 12-14, 2010, Hangzhou, China.
  15. Muhammad Tanveer and Jean W. Zu, "Finite strain analysis of almost incompressible hyperelastic solids by mixed p-type method", 16th US National Congress of Theoretical and Applied Mechanics, June 27-July 2, 2010, University Park, PA, USA.
  16. Muhammad Tanveer and Jean W. Zu, "Mixed p-type method for the nonlinear transient vibration analysis of almost incompressible axisymmetric solids", 16th US National Congress of Theoretical and Applied Mechanics, June 27-July 2, 2010, University Park, PA,USA.
  17. Melnik, R.,Wang, L., Dhote, R., and Zu, J., "Numerical analysis of phase transformations in finite size nanostructures with mesoscopic models", IV European Conference on Computational Mechanics (ECCM), May 16-21, 2010, Paris, France.
  18. H. S. Xiao, W. W. Chen, C. B. Chu and J. W. Zu, "Integrated Control and Coordination of Vehicle System Dynamics", 2009 ASME International Design Engineering Technical Conference, August 2-September 2, 2009, San Diego, California,USA.
  19. Adebukola Olatunde and Jean Zu, "Optimization of Twin Tensioner performance in a Belt-driven Integrated Starter-generator System for Micro-hybrids", 2009 ASME International Design Engineering Technical Conference, August 2-September 2, 2009, San Diego, California, USA.
  20. Alireza Hariri and Jean Zu, "Design of a Tissue Resonator Indenter Device for Measurement of Soft Tissue Viscoelastic Properties Using Parametric Identification", 2009 ASME International Design Engineering Technical Conference, August 2-September 2, 2009, San Diego, California, USA.
  21. Qiming Pang and Jean Zu, "A Uniaxial Cyclic Stretch Apparatus For Tissue Engineering", 2009 ASME International Design Engineering Technical Conference, August 2-September 2, 2009, San Diego, California, USA.
  22. S. Karunendiran, M. Clark and J.W. Zu, 2009, "A New Approach for Life Prediction of Serpentine Accessory Belt Drive System Using Actual Measured Data", SAE Paper 2009-01-0811.
  23. Petru Razvan Scurtu, Mike Clark and Jean W. Zu, 2009, "Coupled Longitudinal and Transverse Vibration of Automotive Belts: Experimental Study", SAE Paper 2009-01-1198.
  24. Seeva Karunendiran, Mike Clark and Jean W. Zu, "Life Prediction of Serpentine Accessory Belt Drive Systems: Theory and Experiment", Symposium on Mechanics of Slender Structures, July 23-25, 2008, Baltimore, Maryland, USA.
  25. Petru Scurtu, Mike Clark and Jean W. Zu, "Analog Equation Method for Coupled Axial and Transverse Vibration of Automotive Belts", Symposium on Mechanics of Slender Structures, July 23-25, 2008, Baltimore, Maryland, USA.
  26. Qiming Pang, Jean W. Zu, Geoffrey Siu and Ren-Ke Li, "Design and Development of a Novel Biostretch Apparatus for Tissue", CSME Forum, June 5-8, 2008, Ottawa, Ontario, Canada.
  27. Seeva Karunendiran, Mike Clark and Jean W. Zu, "Development of A New Fatigue Damage Model of Serpentine Accessory Belts", CSME Forum, June 5-8, 2008, Ottawa, Ontario, Canada.
  28. Petru Scurtu, Mike Clark and Jean W. Zu, "Coupled Axial and Transverse Vibration of Automotive Belts", CSME Forum, June 5-8, 2008, Ottawa, Ontario, Canada.
  29. Pinhas Ben-Tzvi, Andrew A. Goldenberg and Jean W. Zu, "Design, Simulations and Optimization of a Tracked Mobile Robot Manipulator with Hybrid Locomotion and Manipulation Capabilities", Proceedings of the 2008 IEEE International Conference on Robotics and Automation (ICRA2008), May 19-23, 2008, Pasadena, California, USA.
  30. P. Honarmandi, J. W. Zu and K. Behdinan, "Optimization of Scratch Drive Actuators considering Reliability and Fatigue Criteria", 2007 ASME International Mechanical Engineering Congress and Exposition, November 11-15, 2007, Seattle, Washington, USA.
  31. P. Ben-Tzvi, A. A. Goldenberg and Jean W. Zu, "Implementation of Sensors and Control Paradigm for a Hybrid Mobile Robot Manipulator for Search and Rescue Operations", Proceedings of the 2007 IEEE International Workshop on Robotic and Sensors Environments (ROSE 2007), October 12-13, 2007, pp. 92-97, Ottawa, Ontario, Canada. *** Winner of the Best Student Paper Award ***
  32. Pinhas Ben-Tzvi, Cyrus Raoufi, Andrew A. Goldenberg and Jean W. Zu, "Virtual Prototype Development and Simulations of a Tracked Hybrid Mobile Robot", Proceedings of MSC. Software 2007 Virtual Product Development Conference, October 10-12, 2007, Detroit, Michigan, USA.
  33. H. S. Xiao and J. W. Zu, "Evolutionary multiobjective optimization using artificial immune systems", International Conference on Product Design and Manufacturing Systems (ICPDMS2007), October 12-15, 2007, Chongqing, China.
  34. Pinhas Ben-Tzvi, Andrew A. Goldenberg and Jean W. Zu, "A Novel Control Architecture and Design of Hybrid Locomotion and Manipulation Tracked Mobile Robot", IEEE International Conference on Mechatronics and Automation, August 5-8, 2007, Harbin, Heilongjiang, China.
  35. Han Song Xiao and Jean W. Zu, "A New Constrained Multiobjective Optimization Algorithm Based on Artificial Immune Systems", 2007 IEEE International Conference on Mechatronics and Automation (ICMA 2007), August 5-8, 2007, Harbin, Heilongjiang, China.
  36. H. S. Xiao and J. W. Zu, "A New Multiobjective Optimization Algorithm Using Artificial Immune Systems", CANCAM'07, June 3-7, 2007, Toronto, Ontario, Canada.
  37. Honarmandi, P., Zu, J. W., and Behdinan, K., "Probabilistic Optimization of Structures with Fatigue Constraint", CANCAM'07, June 3-7, 2007, Toronto, Ontario, Canada.
  38. A. Hariri, J. W. Zu and R. Ben Mrad, "Development of a Model for Predicting Dry Stiction in Microelectromechanical Systems (MEMS)", International Symposium on MOEMS-MEMS 2007 Micro and Nanofabrication, January 20-25, 2007, San Jose, California, USA.
  39. A. Hariri, J. W. Zu and R. Ben Mrad, "Modeling of the Elastic Properties of Contact between Nominally Flat Rough Surfaces Using a New Multiple Point Asperity Model", 2006 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2006, Chicago, Illinois, USA.
  40. A. Hariri, J. W.Zu and R.Ben Mrad, "A New Multiple Point Asperity Model for Contact between Nominally Flat Surfaces", 2006 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2006, Chicago, Illinois, USA.
  41. P. Honarmandi, J. W. Zu and K. Behdinan, "Modeling and Analytical Study of Scratch Drive Actuators", 2006 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2006, Chicago, Illinois, USA.
  42. A. Elmarakbi and J. Zu, "Studying the Effects of Non-Extendable Hydraulic Absorbers with Cubic Nonlinear Characteristics on the Vehicle Dynamic Response under High Speed Impacts." Proceedings of FISITA 2006 World Automotive Congress, October 22-27, 2006, Paper No. F2006M024,Yokohama, Japan.
  43. Qiuzhen Qu and Jean W. Zu, "On Steering Control of Commercial Three-Axle Vehicle", The Second International Conference on Dynamics, Vibration and Control, August 23-26, 2006, Beijing, China.
  44. P. Honarmandi, J. W. Zu and K.Behdinan, "Reliability Based Design Optimization of Cantilever Beams Under Fatigue Constraint", 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2006, AIAA-2006-1941.
  45. Gong Cheng and Jean W. Zu, "Nonlinear Dynamic Analysis of a 2-Dof Discontinuous System Under Two-Frequency Excitations", 13th International Congress on Sound and Vibration, July 2-6, 2006,Vienna, Austria.
  46. Gong Cheng, Jean W. Zu and Ming Zhong, "Development of a New Cardiac Muscle Model to Study the Influence of Muscle Mass", 2006 ASME Summer Bioengineering Conference, June 21-25, 2006, Amelia Island, Florida, USA.
  47. Gong Cheng, Jean W. Zu and Ming Zhong, "a Study on Cardiac Muscle Isometric and Isotonic Contraction by a New Multi- Segment Hill's Three-Element Model", 2006 ASME Summer Bioengineering Conference, June 21-25, 2006, Amelia Island, Florida, USA.
  48. Peyman Honarmandi, Jean W. Zu and Kamran Behdinan, "Reliability Based Design Optimization of Cantilever Beams Under Fatigue Constraint", 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, May 1-4, 2006, Newport, Rhode Island, USA.
  49. Alireza Hariri, Jean W. Zu and Ridha BenMrad, "A New Multiple Point Asperity Model for Contact between Nominally Flat Surfaces", CSME Forum, May 21-24, 2006, Calgary, Canada.
  50. Hansong Xiao and Jean W. Zu, "Application of Artificial Immune Systems to Multiobjective Optimization", CSME Forum, May 21-24, 2006, Calgary, Canada.
  51. Hansong Xiao, Jean W. Zu and Wieslaw Zaton, "Fillet Shape Optimization for Gear Teeth", 2005 ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, September 24-28, 2005, Long Beach, California, USA.
  52. Mohammad Biglarbegian and Jean W. Zu, "Dynamic Analysis and Simulation of Vehicles Carrying Liquid Cargo during Braking", 2005 ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, September 24-28, 2005, Long Beach, California, USA.
  53. Qiuzhen Qu, Jean W. Zu and Gong Cheng, "Analytical Modeling and Analysis for Scratch Drive Actuator", 2005 ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, September 24-28, 2005, Long Beach, California, USA.
  54. W. Chen, H. Xiao, L. Liu and J. W. Zu, "Integrated Vehicle Dynamic Control Through Coordinating Control of Steering and Suspension System", 2005 ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, September 24-28, 2005, Long Beach, California, USA.
  55. Jean W. Zu, Gong Cheng and Qian Tang, "Equilibrium and Stability of Micro-Cantilevers Used in Atomic Force Microscopy", International Conference on MEMS, NANO, and Smart Systems, August 25-27, 2004, Banff, Alberta, Canada.
  56. Jean W. Zu, Qiuzhen Qu and Gong Cheng, "Analytical modeling and Quantitative Analysis of Scratch Drive Actuator", Proceedings of the 2004 International conference on MEMS, NANO, and Smart Systems, August 25-27, 2004, Banff, Alberta, Canada.
  57. Jean W. Zu, Qiuzhen Qu and Gong Cheng, "Quantitative Analysis for Force and Vibrations of Scratch Drive Actuator", International conference on MEMS, NANO, and Smart Systems, August 25-27, 2004, Banff, Alberta, Canada.
  58. A. Hariri, J. Zu and R. BenMrad, "Modeling of Surface Forces between Microsize Objects in Dry Condition", International Conference on MEMS, NANO, and Smart Systems, August 25-27, 2004, Banff, Alberta, Canada.
  59. Ahmed Elmarakbi and Jean Zu, "Enhancement of Vehicle Occupant Safety Performance in Frontal Collisions Using Smart Structures", 7th World Conference on Injury Prevention and Safety Promotion, June 6-9, 2004, Vienna, Austria.
  60. Ahmed Elmarakbi and Jean Zu, "Crashworthiness of Vehicle Structures and Safety Criteria for Variable Size Occupants", 7th World Conference on Injury Prevention and Safety Promotion, June 6-9, 2004, Vienna, Austria.
  61. Honarmandi, K. Behdinan, J.W. Zu and C. Park, "Fatigue Life Improvement of Bolt-nut Joints using axiomatic Design and FEM Approach", CSME Forum'04, June 1-4, 2004, London, Ontario, Canada.
  62. H. Xiao and J. W. Zu, "Cam Profile Optimization for Cam-drive Engines", CSME Forum'04, June 1-4, 2004, London, Ontario, Canada.
  63. Q. Qu and J. W. Zu, "Model Following Control of Four-wheel-steering", CSME Forum'04, June 1-4, 2004, London, Ontario, Canada.
  64. Ahmed Elmarakbi and J. W. Zu, "Enhancement of Vehicle Occupant Safety Performance in Frontal Impacts Using an Extendable Smart Structure", CSME Forum'04, June 1-4, 2004, London, Ontario, Canada.
  65. Ahmed Elmarakb and Jean Zu, "Frontal Impact Enhancement Using Extendable Energy Absorbers", FISITA World Automotive Congress, May 23-27, 2004, Barcelona, Spain.
  66. Ahmed Elmarakb and Jean Zu, "Towards The Optimum Solution Of Vehicle Compatibility: A Numerical Study Using A Fixed Smart Structure", FISITA World Automotive Congress, 23-27 May, 2004, Barcelona, Spain.
  67. Ahmed Elmarakbi and Jean Zu, "Dynamic Analysis of Vehicle-to-Vehicle and Vehicle to-Barrier in Frontal Collisions: Vehicle Safety and Occupant Protection Performance", 2004 JSAE Annual Congress, May 19-21, 2004, Yokohama, Japan.
  68. Gong Cheng and Jean W. Zu, "Chaotic Motion of a Two-Frequency Forced Oscillator with Dry Friction", IMECE'03, November 15-21, 2003, Washington D.C., USA.
  69. Wei Zhang and Jean W. Zu, "Analysis of Nonlinear Dynamics for a Rotor-Active Magnetic Bearing System with Time-Varying Stiffness", IMECE'03, November 15-21, 2003, Washington D.C., USA.
    70. 69. Ahmed Elmarakbi and Jean W. Zu, "Numerical Analysis and Optimization of Vehicle Compatibility Using a Smart Vehicle Structure", Proceedings of the International Body Engineering Conference, IBEC, SAE Paper No. 2003-01-2802, October 27-29, 2003, Chipa, Japan. 70. Nabeel Shabaneh and Jean W. Zu, "Nonlinear Free Vibration of a Rotor Shaft System with Viscoelastically Supported Bearings", ASME 19th Biennial Conference on Mechanical Vibration and Noise, September 2-6, 2003, Chicago, Illinois, USA.
  70. Wei Zhang and Jean W. Zu, "Computation of Normal Forms for High Dimensional Nonlinear Systems and Application to Nonplanar Motions of a Cantilever Beam", ASME 19th Biennial Conference on Mechanical Vibration and Noise, September 2-6, 2003, Chicago, Illinois, USA.
  71. R. Ben Mrad, A. Abhari and J. Zu, "Control Strategies For an Inchworm Piezomotor", CIMSA 2003 - International Symposium on Computational Intelligence for Measurement Systems and Applications, July 29-31 2003, Lugano, Switzerland.
  72. Gong Cheng and Jean W. Zu, "Multi-frequency Oscillations of a Coulomb Damped Belt Drive System", 8th International Conference on Recent Advances in Structural Dynamics, July 13-16, 2003, Southhampton, UK.
  73. Ahmed Elmarakbi and Jean Zu, "Numerical Simulations of Smart-Standard Vehicles Collision Improvement: Crashworthiness Optimization", Proceedings of the Canadian Multidisciplinary Road Safety Conference XIII, June 8-11, 2003, Banff, Alberta, Canada.
  74. Ahmed Elmarakbi and Jean Zu, "Smart Vehicle Structure for Offset Frontal Collision Improvement", 19th Canadian Congress of Applied Mechanics, June 1-6 2003, Calgary, Alberta, Canada.
  75. Ahmed Elmarakbi and Jean Zu, "Investigation and Analysis of Vehicle Compatibility in Full Frontal Impact", 19th Canadian Congress of Applied Mechanics, June 1-6 2003, Calgary, Alberta, Canada.
  76. Peyman Honarmandi, Kamran Behdinan and Jean W. Zu, "Single-Axial Fatigue Analysis of the Automotive Front Door Hinge Assemblyh Based on FEM", 19th Canadian Congress of Applied Mechanics, June 1-6 2003, Calgary, Alberta, Canada.
  77. Leila Bahreinian, Kamran Behdian and Jean. W. Zu, "Transient Response of Bridges Traversed by Moving Vehicles: Pitch-Bounce Model", 19th Canadian Congress of Applied Mechanics, June 1-6 2003, Calgary, Alberta, Canada.
  78. Gong Cheng and Jean W. Zu, "Non-linear dynamic analysis of an optical fiber coupler", 5th International Conference on vibration Engineering, September 18-20, 2002, Nanjing, China.
  79. Li-Qun Chen and Jean W. Zu, "Two-to-one resonance in the parametrically excited axially moving string: An integral constitutive law", Ninth Nonlinear Vibrations, Stability, and Dynamics of Structures Conference, July 28-August 1, 2002, Virginia Tech, Blacksburg, VA, USA.
  80. Gong Cheng and Jean W. Zu, "Two Frequency Forced Vibration under Coulomb and Viscous Frictions", 9th International Congress on Sound and Vibration, July 8-11, 2002, Orlando, Florida, USA.
  81. T. Zhou, A.A. Goldenberg and J. W. Zu, "Modal Force Based In put Shaper for Vibration Suppression of Flexible Payloads", 2002 IEEE International Conference on Robotics & Automation, May 2002, Washington DC, USA.
  82. M. Nouri and J. W. Zu, "Optimization and Sensitivity Analysis of Automotive Serpentine Belt Drive Systems Using a Simplified Method", CSME Forum'02, May 2002, Kingston, Canada.
  83. Gong Cheng and Jean W. Zu, "Vibration Analysis of an Optical Fiber Coupler", CSME Forum'02, May 2002, Kingston, Canada.
  84. Ahmed Elmarakbi and J. W. Zu, "Variable Parameters Affecting Dynamic Buckling Behaviour of Thin Circular Tube", CSME Forum'02, May 2002, Kingston, Canada.
    85. 86. Zhichao Hou and Jean W. Zu, "Parametric Vibration of Viscoelastic Moving Belts Using Standard Linear Solid Model", Fifth Asia-Pacific Conference on Computational Mechanics (APCOM'01), October 28-31, 2001, Hangzhou, China.
  85. N. Baddour and J. W. Zu, "Nonlinearly Coupled In-Plane and Transverse Vibrations of a Spinning Disk", ASME 18th Bieannial Conference on Mechanical Vibration and Noise, September 9-12, 2001, Pittsburgh.
  86. Z. Hou and J. W. Zu, "Parametric Vibration of Viscoelastic Moving Belts Using Standard Linear Solid Model", ASME 18th Biennial Conference on Mechanical Vibration and Noise, September 9-12, 2001, Pittsburgh.
  87. G. Cheng and J. W. Zu, "Chaotic Motion of a Magnetic Rigid Satellite in an Orbit near the Equational Plane of the Earth", CANCAM 2001, June 3-7, 2001, St. Johns, Canada.
  88. R. Ben Mrad, A. Abhari and Jean W. Zu, "A Controller for an Inchworm Piezomotor", Proceeding of the IASTED International Conference, June 27-29, 2001, Banff, Alberta, Canada.
  89. F. P.J. Rimrott and J.W. Zu, "Microgravity, Collinearity and the Tendency to Disintegrate", 52 Astronautical Congress, August 2001, Toulouse, France.
  90. Zhichao Hou and Jean W. Zu, "Comparison of Different Viscoelastic Models for Nonlinear Free Vibrations of Moving Belts", ASME 2000 IMECE, November 5-20, 2000, Orlando, Florida, USA.
  91. Jean W. Zu and Lixin Zhang, " Modal Analysis in Coupled Vibration of Serpentine Belt Drive Systems", ASME 2000 IMECE, November 5-20, 2000, Orlando, Florida, USA.
  92. Jean W. Zu and R. P.J. Rimrott, "Collinearity Principle Applied to to a Gyrosatellite", ICTAM 2000, August 27-September 2, 2000, Chicago, USA.
  93. Jean W. Zu and Lixin Zhang, "Coupled Vibration of Serpentine Belt Drive Systems", Internal Conference on Advanced Problems in Vibration Theory and Applications", June 19-22, 2000, Xi'an, China.
  94. Tong Zhou, Jean W. Zu and A.A. Goldenberg, "Vibration Controllability of Flexible Robot-Payload Systems", IEEE International Conference on Robotics & Automation, April 2000, San Francisco, USA.
  95. Tong Zhou, Jean W. Zu and A.A. Goldenberg, "Modeling of Flexible Robot-Payload Systems Through Component Synthesis", 31st International Symposium on Robotics, May 14-17, 2000, Montreal, Canada.
  96. N. H. Shabaneh and Jean W. Zu, "Vibration Analysis of Viscoelastically Supported Rotor-Bearing Systems", Asia-Pacific Vibration Conference'99 (A-PVC'99), December, 1999.
  97. Jean W. Zu and Lixin Zhang, "Dynamic Stability of Serpentine Belt Drive Systems", Fourth Asia-Pacific Conference on Computational Mechanics (APCOM'99), December, 1999, Singapore.
  98. Lixin Zhang and Jean W. Zu, "Nonlinear Vibration of Parametrically Excited Viscoelastic Moving Belts", ASME Seventeenth Biennial Conference on Mechanical Vibration and Noise, September, 1999, Las Veges.USA.
  99. Lixin Zhang and Jean W. Zu, "Internal Resonance and Nonlinear Response of Hybrid Serpentine Belt Drive Systems", 1st Canadian Conference on Nonlinear Solid Mechanics, June, 1999, Victoria, Canada.
  100. A. Abhari, R. Ben Mrad and J. W. Zu, "A High Bandwidth Piezo-Ceramic Based Linear Motor", Third International Conference on Industrial Automation, June, 1999, Montreal, Canada.
  101. Natalie Baddour and Jean W. Zu, "Solution of a New Model for a Spinning Disk", 17th CANCAM, May,1999, Hamilton, Canada.
  102. Jean W. Zu and Lixin Zhang, "Free Vibration of Viscoelastic Moving Belts", 1998 International Mechanical Engineering Congress & Exposition, Symposium on Dynamics, Acoustics and Simulations, November, 1998, Anaheim, USA.
  103. Lixin Zhang and Jean W. Zu, "Nonlinear Forced Vibrations of Viscoelastic Moving Belts", The Third International Conference on Nonlinear Mechanics, August, 1998, Shanghai, China.
  104. K.O. Eneremadu, Jean W. Zu and Fred P.J. Rimrott, "Stability of Nonlinear Two-Frequency Oscillations of Cylindrical Shells", The Third International Conference on Nonlinear Mechanics, August, 1998, Shanghai.
  105. Jean W. Zu, "Making Vibration Concept Visualized for Students - Implementing an Innovative Laboratory", 11th Canadian Conference on Engineering Education, July,1998, Halifax, Canada.
  106. Lixin Zhang and Jean W. Zu, "The Direct Stochastic Newmark Method in the State Space", CSME Forum'98, May,1998, Toronto, Canada.
  107. Jean W. Zu and Edward Wong, "Dynamic Response of a Spinning Timoshenko Shaft With Coupled Bending and Torsion", ASME DETC'97, 16th Biennial Conference on Mechanical Vibration and Noise, September, 1997, Sacramento, USA.
  108. Seeva Karunendiran, W.L. Cleghorn and Jean W. Zu, "Vibration of a Timoshenko Beam Having Non-classical Boundary Conditions and Subjected to Axial Load", 16th CANCAM, June, 1997, Quebec City, Canada.
  109. Jean W. Zu and Zhenyi Ji, "Steady State Response of Rotor Systems with Timoshenko Shaft and Nonlinear Bearings", 16th CANCAM, June,1997,Quebec City, Canada.
  110. Jean W. Zu and Zhenyi Ji, "An Improved Transfer Matrix Method for Nonlinear Rotor-Bearing Systems", IMECE 1996, Symposium on Elasto-Impact and Friction, November 1996, Atlanta, USA.
  111. Jean W. Zu and John Melanson, "Complex Frequencies and Modes of Externally Damped Shafts Under Different Boundary Conditions", IMECE 1996, Symposium on Nonlinear Dynamics and Controls, November 1996, Atlanta, USA.
  112. S. Karunendiran and Jean W. Zu, "Complex Eigenvalues and Eigenvectors of Shaft-Bearing Systems", CSME Forum 96, June, 1996, Hamilton.
  113. Degao Li, A.A. Goldenberg and Jean W. Zu, "Peak Torque Reduction with Redundant Manipulators", 1996 IEEE International Conference on Robotics & Automation, April 22-28 1996, Minneapoils, MN, USA.
  114. Degao Li, Jean W. Zu and A.A. Goldenberg, "Dynamics of Flexible Macro-Micro Manipulators", World Automation Congress 96, May 1996, France.
  115. Degao Li, Jean W. Zu and A.A. Goldenberg, "Incorporation of Joint Flexibility with Link Flexibility: Dynamic Modeling and Analysis", ASME 15th Biennial Conference on Vibration and Noise, September 1995, Boston, USA.
  116. Degao Li, Jean W. Zu and Andrew A. Goldenberg, "Incorporation of Joint Flexibility with Link Flexibility: Dynamic Modeling and Analysis", ASME the 50th Design Technical Conference, September 1995, Boston, USA.
  117. F.P.J. Rimrott and Jean W. Zu, "Thermal Flutter", The First International Symposium on Thermal Stresses and Related Topics, September 1995, Japan.
  118. Jean W. Zu and S. Karunendiran, "Analytical Prediction on Natural Frequencies of a Rotor-Bearing System", 15th CANCAM, June 1995, Victoria, Canada.
  119. Jean W. Zu, "Free Vibration Analysis of Damped Spinning Timoshenko Beams", 15th CANCAM, June 1995, Victoria, Canada.
  120. Ray P.S. Han and Jean W. Zu, "Dynamics of Non-conservative Spinning Beam Systems", ICVE'94, International Conference on Vibration Engineering, June 1994, Beijing.
  121. Jean W. Zu and Ray P.S. Han, "On the Precession Frequencies and Critical Speeds of a Spinning beam", ISROMAC-5 Symposium on Transport Phenomena & Dynamics of Rotating Machining, February 1994, Hawaii, USA.
  122. Zheng, L.X.Zhang, Ray P.S. Han and Jean W. Zu, "The Covariance Matrix Method of Nonlinear Method of Nonlinear System Subjected to Nonstationary Random Excitation", ICVE'94, International Conference on Vibration Engineering, June, 1994, Beijing, China.
  123. Jean W. Zu and Ray P.S. Han, "Dynamic Response of a Spinning Timoshenko Beam Subjected to a Moving Load with General Boundary Conditions", 1993 ASME Winter Conference, 1993, New Orleans, USA.
  124. Jean W. Zu and Ray P.S. Han, "Natural Frequencies and Normal Modes of a Spinning Timoshenko Beam with General Boundary Conditions", 1992 ASME Summer Conference, 1992, Scottsdale, Arizona, USA.
  125. Jean W. Zu and Ray P.S. Han, "Free Vibration Analysis of Spinning Timoshenko Beams with General Classical Boundary Conditions", 13th CANCAM, 1991, Winnipeg, Canada.
  126. Ray P.S. Han and Jean W. Zu, "A Simplified Solution for the DynamŽics of Spinning Timoshenko Beams", 13th CANCAM, 1991, Winnipeg, Canada.
  127. Ray P.S. Han, Mike Xu and Jean W. Zu, "On the Eigensolutions of Elastic Mechanisms", CSME Forum '90, 1990, Toronto, Canada.
  128. Ray P.S. Han and Jean W. Zu, "Free Vibration Analysis of a Rotating Workpiece During Machining", ISROMAC-3 Symposium on Transport Phenomena & Dynamics of Rotating Machining, 1990, Hawaii, USA.
  129. Zhao-Chang Zheng, Bao-Rong Cheng and Jean W. Zu, "Dynamic ReanalyŽsis of Offshore Platforms", Sixth IMAC, 1988, Japan.
  130. Zhao-Chang Zheng, Bao-Rong Cheng and Jean W. Zu, "Improvement of Computational Method for Eigenvalue of Large Complex Structural System", ASME Technology Conferences-11 Biennial Conference on Mechanical Vibration and Noise, 1987, Boston, USA.

Books, Chapters in Books, UTMIE Series, Review Articles, and Non Technical Articles

 

  1. Adebuloka O. Olatunde and Jean W. Zu, 2009, A Tensioner for the Belt-Driven Integrated Starter-Generator, VDM Verlag Dr. Muller, ISBN: 978-3-639-16216-5.
  2. Jean W. Zu, 2001, "Belts", an invited article for Encyclopedia of Vibration, Academic Press Ltd., pp. 165-173. Editors: Simon G. Braun, David J. Ewins and Singiresu S. Rao.
  3. Authors: Tong Zhou, Advisers: Jean W. Zu and Andrew A. Goldenberg, 2002, Dynamics and vibration-suppression control of flexible-payload manipulator systems, Bibliometrics, Pages: 133, ISBN:0-612-74713-1.

Patents

 

  1. Ben-Tzvi, P., Goldenberg, A.A., and Zu, J.W., "Hybrid Mobile Robot", Canadian Patent Application # CA2631116, May 12, 2008.
  2. Pinhas Ben-Tzvi, Andrew A. Goldenberg, and Jean W. Zu, "Hybrid Mobile Robot", United States Patent Application Publication, Pub. No.: US 2008/0277172 A1, Pub. Date: Nov.13, 2008, Appl. No: 11/980,782, Filed: Oct. 31, 2007.

 

Secondary Navigation

Nullamlacus dui ipsum conseque loborttis

Nullamlacus dui ipsum conseque loborttis non euisque morbi penas dapibulum orna. Urnaultrices quis curabitur phasellentesque.

Continue Reading »