Group Publications

Journal Articles

  1. Reza Ugalde, A., Kesler, O., Naguib, H.E. Highly stable bifunctional catalyst for Zn-Air batteries: The effect of a nitrated carbon support on Co3O4 activity (2020) Journal of Power Sources, 453, art. no. 227834.
  2. Cuglietta, M., Arevalo-Quintero, O., Kesler, O. Performance and Properties of Suspension Plasma Sprayed Metal-Supported Cu-Co-Ni-SDC SOFC Anodes in Methane (2019) Fuel Cells, 19 (3), pp. 268-279.
  3. Arevalo-Quintero, O., Kesler, O. Development of Bi-layer Metal Substrate Architectures for Suspension Plasma Sprayed Solid Oxide Fuel Cells (2018) Fuel Cells, 18 (4), pp. 466-475.
  4. Kuhn, J., Gupta, M., Kesler, O., Björklund, S. The effect of fuel electrode roughness on the properties of plasma sprayed solid oxide cells (2018) Journal of the Electrochemical Society, 165 (9), pp. F693-F701.
  5. Aicart, J., Kuhn, J., Kesler, O. Performance of Non-Destructive Compressive Seals for Reversible Solid Oxide Cells (2017) Fuel Cells, 17 (1), pp. 90-99.
  6. Harris, J., Kuhn, J., Kesler, O. Atmospheric plasma-sprayed metal-supported solid oxide fuel cells with varying cathode microstructures (2017) Journal of the Electrochemical Society, 164 (4), pp. F441-F447.
  7. Fan, E.S.C., Kuhn, J., Kesler, O. Suspension plasma spraying of La0.6Sr0.4Co0.2Fe0.8O3-δ cathodes: Influence of carbon black pore former on performance and degradation (2016) Journal of Power Sources, 316, pp. 72-84.
  8. Harris, J., Yan, Y., Bateni, R., Kesler, O. Degradation of La0.6Sr0.4Co0.2Fe0.8O3–δ–Ce0.8Sm0.2O1.9 Cathodes on Coated and Uncoated Porous Metal Supports (2016) Fuel Cells, 16 (3), pp. 319-329.
  9. Fan, E.S.C., Kesler, O. Deposition of Lanthanum Strontium Cobalt Ferrite (LSCF) Using Suspension Plasma Spraying for Oxygen Transport Membrane Applications (2015) Journal of Thermal Spray Technology, 24 (6), pp. 1081-1092.
  10. Kuhn, J., Kesler, O. Carbon deposition thresholds on nickel-based solid oxide fuel cell anodes I. Fuel utilization (2015) Journal of Power Sources, 277, pp. 443-454.
  11. Kuhn, J., Kesler, O. Carbon deposition thresholds on nickel-based solid oxide fuel cell anodes II. Steam:carbon ratio and current density (2015) Journal of Power Sources, 277, pp. 455-463.
  12. Yan, Y., Bateni, R., Harris, J., Kesler, O. Fabrication of reactive element oxide coatings on porous ferritic stainless steel for use in metal-supported solid oxide fuel cells(2015) Surface and Coatings Technology, 272, pp. 415-427.
  13. Puranen, J., Laakso, J., Honkanen, M., Heinonen, S., Kylmälahti, M., Lugowski, S., Coyle, T.W., Kesler, O., Vuoristo, P. High temperature oxidation tests for the high velocity solution precursor flame sprayed manganese-cobalt oxide spinel protective coatings on SOFC interconnector steel (2015) International Journal of Hydrogen Energy, 40 (18), pp. 6216-6227.
  14. Kuhn, J., Kesler, O. Method for in situ carbon deposition measurement for solid oxide fuel cells (2014) Journal of Power Sources, 246, pp. 430-437.
  15. Metcalfe, C., Lay-Grindler, E., Kesler, O. Characterization of Ni-YSZ anodes for solid oxide fuel cells fabricated by solution precursor plasma spraying with axial feedstock injection (2014) Journal of Power Sources, 247, pp. 831-839.
  16. Marr, M., Kuhn, J., Metcalfe, C., Harris, J., Kesler, O. Electrochemical performance of solid oxide fuel cells having electrolytes made by suspension and solution precursor plasma spraying (2014) Journal of Power Sources, 245, pp. 398-405.
  17. Bateni, M.R., Wei, P., Kesler, O., Petric, A. Characterization of aluminum coatings formed on porous ferritic stainless steels by pack cementation (2013) Materials and Manufacturing Processes, 28 (12), pp. 1314-1321.
  18. Marr, M., Metcalfe, C., Fan, E.S.C., Kesler, O. Improved electrolyte performance in plasma sprayed SOFCs by electrode modification (2013) ECS Electrochemistry Letters, 2 (11), pp. F85-F87.
  19. Metcalfe, C., Kuhn, J., Kesler, O. Characterization of Ni-YSZ anodes for solid oxide fuel cells fabricated by suspension plasma spraying with axial feedstock injection (2013) Journal of Power Sources, 243, pp. 172-180.
  20. Cuglietta, M., Kuhn, J., Kesler, O. A novel hybrid axial-radial atmospheric plasma spraying technique for the fabrication of solid oxide fuel cell anodes containing Cu, Co, Ni, and samaria-doped ceria (2013) Journal of Thermal Spray Technology, 22 (5), pp. 609-621.
  21. Metcalfe, C., Harris, J., Kuhn, J., Marr, M., Kesler, O. Progress in metal-supported axial-injection plasma sprayed solid oxide fuel cells using Nanostructured NiO-Y0.15Zr0.85O 1.925 dry powder anode feedstock (2013) Journal of Thermal Spray Technology, 22 (5), pp. 599-608.
  22. Harris, J., Metcalfe, C., Marr, M., Kuhn, J., Kesler, O. Fabrication and characterization of solid oxide fuel cell cathodes made from nano-structured LSCF-SDC composite feedstock (2013) Journal of Power Sources, 239, pp. 234-243.
  23. Marr, M., Waldbillig, D., Kesler, O. The influence of process equipment on the properties of suspension plasma sprayed yttria-stabilized zirconia coatings (2013) Journal of Thermal Spray Technology, 22 (2-3), pp. 116-124.
  24. Cuglietta, M., Chaudhary, K.L., Ge, S., Kesler, O. Development of a multi-component aqueous NiO, CuO, and Co3O4 suspension for use in suspension plasma spraying of SOFC anode layers (2013) Powder Technology, 237, pp. 76-86.
  25. Light, N., Kesler, O. Electrochemical performance of plasma sprayed Cu-Co-SDC mono-layer and Cu-Co-SDC/Cu-YSZ bi-layered anodes manufactured from coarse and fine feedstock powders (2013) Journal of Power Sources, 232, pp. 389-400.
  26. Light, N., Kesler, O. Air plasma sprayed Cu-Co-GDC anode coatings with various Co loadings (2013) Journal of Power Sources, 233, pp. 157-165.
  27. Marr, M., Kesler, O. Influence of plasma heat flux on segmentation cracking and permeability of thin suspension plasma sprayed coatings (2013) Surface and Coatings Technology, 216, pp. 289-296.
  28. Macwan, A., Chen, D.L., Marr, M., Kesler, O. Residual stresses in suspension plasma sprayed electrolytes in metal-supported solid oxide fuel cell half cells (2013) Journal of Power Sources, 221, pp. 397-405.
  29. Marr, M., Kesler, O. Permeability and microstructure of suspension plasma-sprayed YSZ electrolytes for SOFCs on various substrates (2012) Journal of Thermal Spray Technology, 21 (6), pp. 1334-1346.
  30. Dos Santos, M.C., Kesler, O., Reddy, A.L.M. Nanomaterials for energy conversion and storage (2012) Journal of Nanomaterials, 2012, art. no. 159249
  31. Lay, E., Metcalfe, C., Kesler, O. The influence of incorporating MgO into Ni-based cermets by plasma spraying on anode microstructural and chemical stability in dry methane (2012) Journal of Power Sources, 218, pp. 237-243.
  32. Poon, M., Kesler, O. The influence of pore formers on the microstructure of plasma-sprayed NiO-YSZ anodes (2012) Journal of Power Sources, 210, pp. 204-217.
  33. Cuglietta, M., Kesler, O. Relationship between particle and plasma properties and coating characteristics of samaria-doped ceria prepared by atmospheric plasma spraying for use in solid oxide fuel cells (2012) Journal of Thermal Spray Technology, 21 (3-4), pp. 448-460.
  34. Harris, J., Qureshi, M., Kesler, O. Deposition of composite LSCF-SDC and SSC-SDC cathodes by axial-injection plasma spraying (2012) Journal of Thermal Spray Technology, 21 (3-4), pp. 461-468.
  35. Waldbillig, D., Kesler, O. Effect of suspension plasma spraying process parameters on YSZ coating microstructure and permeability (2011) Surface and Coatings Technology, 205 (23-24), pp. 5483-5492.
  36. Arevalo-Quintero, O., Waldbillig, D., Kesler, O. An investigation of the dispersion of YSZ, SDC, and mixtures of YSZ/SDC powders in aqueous suspensions for application in suspension plasma spraying (2011) Surface and Coatings Technology, 205 (21-22), pp. 5218-5227.
  37. Waldbillig, D., Kesler, O. Electrochemical testing of suspension plasma sprayed solid oxide fuel cell electrolytes (2011) Journal of Power Sources, 196 (13), pp. 5423-5431.
  38. C. Metcalfe, O. Kesler, T. Rivard, F. Gitzhofer, N. Abatzoglou. Connected Three-Phase Boundary Length Evaluation in Modeled Sintered Composite Solid Oxide Fuel Cell Electrodes. Journal of The Electrochemical Society, 157 (9) (2010) p. B1326-B1335.
  39. J. Harris, O. Kesler, Atmospheric Plasma Spraying (APS) Low-Temperature Cathode Materials for Solid Oxide Fuel Cells (SOFCs), Journal of Thermal Spray Technology, 19 (1), (2010), 328.
  40. H. Chhina, S. Campbell, O. Kesler, Characterization of Nb and W doped titania as catalyst supports for proton exchange membrane fuel cells, Journal of New Materials for Electrochemical Systems, 12 (4), (2009) 177-185.
  41. H. Chhina, S. Campbell, O. Kesler, Ex-situ and in-situ stability of platinum supported on niobium-doped titania for PEMFCs, Journal of the Electrochemical Society, 156 (10), (2009) B1232-B1237.
  42. N. Benoved, O. Kesler, Air plasma spray processing and electrochemical characterization of Cu-SDC anodes for use in direct-oxidation solid oxide fuel cells, Journal of Power Sources 193 (2009) 454–461.
  43. H. Chhina, D. Susac, S. Campbell, O. Kesler, Transmission electron microscope observation of Pt deposited on Nb doped titania, Electrochemical and Solid State Letters, 12 (6) (2009) B97-B100.
  44. D. Waldbillig, O. Kesler, Characterization of metal-supported axial-injection plasma sprayed solid oxide fuel cells with aqueous suspension plasma sprayed electrolyte layers, Journal of Power Sources 191 (2), (2009), p. 320-329.
  45. D. Waldbillig, O. Kesler, The effect of solids and dispersant loadings on the suspension viscosities and deposition rates of suspension plasma sprayed YSZ coatings Surface and Coatings Technology, 203 (2009) 2098-2101.
  46. X. Zhang, J. Gazzarri, M. Robertson, C. Deces-Petit, O. Kesler, Stability Study of Cermet Supported Solid Oxide Fuel Cells with Bi-layered Electrolyte, Journal of Power Sources 185 (2), (2008), p. 1049-1055.
  47. H. Chhina, S. Campbell, O. Kesler, High surface area synthesis, electrochemical activity, and stability of tungsten carbide supported Pt during oxygen reduction in proton exchange membrane fuel cells, Journal of Power Sources 179 (1), (2008), p. 50-59.
  48. B.D. White, O. Kesler, L. Rose, Air Plasma Spray Processing and Electrochemical Characterization of SOFC Composite Cathodes, Journal of Power Sources 178 (1), (2008), p. 334-343.
  49. B.D. White, O. Kesler, Implications of Electronic Short Circuiting in Plasma Sprayed Solid Oxide Fuel Cells on Electrode Performance Evaluation by Electrochemical Impedance Spectroscopy, Journal of Power Sources 177 (1), (2008), p. 104-110.
  50. J. I. Gazzarri, O. Kesler, Short-stack Modeling of Degradation in Solid Oxide Fuel Cells - Part II: Sensitivity and Interaction Analysis, Journal of Power Sources, 176 (1), (2008), p155-166.
  51. J. I. Gazzarri, O. Kesler, Short-stack Modeling of Degradation in Solid Oxide Fuel Cells - Part I: Contact Degradatio, Journal of Power Sources 176 (1), (2008), p.138-154.
  52. X. Zhang, M. Robertson, C. Deces-Petit, Y.Xie, R. Hui, W. Qu, O. Kesler, R. Maric, D. Ghosh, Solid Oxide Fuel Cells with Bi-Layered Electrolyte Structure, Journal of Power Sources, 175 (2), (2008), p. 800-805.
  53. R. Hui, Z. Wang, O. Kesler, L. Rose, J. Jankovic, S. Yick, R. Maric, D. Ghosh, Thermal plasma spraying of SOFCs: applications, potential advantages, and challenges, Journal of Power Sources, 170 (2), (2007), p. 308-323.
  54. J. I. Gazzarri, O. Kesler, Non-destructive delamination detection in solid oxide fuel cells, Journal of Power Sources, 167 (2), (2007), p. 430-441.
  55. J. I. Gazzarri, O. Kesler, Electrochemical AC impedance model of a solid oxide fuel cell and its application to diagnosis of multiple degradation modes, Journal of Power Sources v. 167 (1), (2007), p. 100-110.
  56. H. Chhina, S. Campbell, O. Kesler, Ex-situ evaluation of tungsten oxide as a catalyst support for proton exchange membrane fuel cells, Journal of the Electrochemical Society 154(6) (2007), p. B533-B539.
  57. L. Rose, O. Kesler, Z. Tang, A. Burgess, Application of Sol Gel Spin Coated Yttria-Stabilized Zirconia Layers for the Improvement of Solid Oxide Fuel Cell Electrolytes Produced by Atmospheric Plasma Spraying, Journal of Power Sources, 167 (2), (2007), p. 340-348.
  58. H. Chhina, S. Campbell, O. Kesler, Thermal and electrochemical stability of tungsten carbide catalyst supports, Journal of Power Sources, v. 164 (2), (2007), p. 431-440.
  59. X. Zhang, M. Robertson, C. Deces-Petit, W. Qu, O. Kesler, R. Maric, D. Ghosh, Internal Shorting and Fuel Loss of a Low Temperature Solid Oxide Fuel Cell with SDC Electrolyte, Journal of Power Sources, v. 164 (2), (2007), p. 668-677.
  60. X. Zhang, C. Deces-Petit, S. Yick, M. Robertson, O. Kesler, R. Maric, D. Ghosh, A Study on Sintering Aids for Sm0.2Ce0.8O1.9 Electrolyte, Journal of Power Sources, v 162 (1), (2006), p. 480-485.
  61. H. Chhina, S. Campbell, O. Kesler, Oxidation-resistant indium tin oxide catalyst support for PEMFCs, Journal of Power Sources, 161(2), (2006), 893-900.
  62. M. Keshmiri, O. Kesler, Colloidal formation of monodisperse YSZ spheres: Kinetics of nucleation and growth, Acta Materialia, v. 54, n. 16, (2006), p. 4149-4157.
  63. X. Zhang, M. Robertson, C. Deces-Petit, Y. Xie, R. Hui, S. Yick, E. Styles, J. Roller, O. Kesler, R. Maric, D. Ghosh, NiO-YSZ Cermet-supported low temperature solid oxide fuel cells, Journal of Power Sources, 161 (2006), 301-307.
  64. X. Zhang, M. Robertson, S. Yick, C. Deces-Petit, E. Styles, W. Qu, Y. Xie, R. Hui, J. Roller, O. Kesler, R. Maric, D. Ghosh, Sm0.5Sr0.5CoO3 + Sm0.2Ce0.8O1.9 Composite Cathode for Cermet Supported Thin Sm0.2Ce0.8O1.9 Electrolyte SOFC Operating Below 600oC, Journal of Power Sources, 160 (2006), 1211-1216.

Conference Publications

  1. Kuhn, J., Gupta, M., Kesler, O., Björklund, S. The effect of fuel electrode roughness on the properties of plasma sprayed solid oxide cells (2017) ECS Transactions, 78 (1), pp. 1477-1487.
  2. Harris, J., Lay-Grindler, E., Metcalfe, C., Kesler, O. Degradation of metal-supported cells with Ni-YSZ or Ni-Ni3Sn-YSZ anodes operated with methane-based fuels (2017) ECS Transactions, 78 (1), pp. 1293-1304.
  3. Harris, J., Kuhn, J., Kesler, O. Atmospheric plasma-sprayed metal-supported solid oxide fuel cells with varying cathode microstructures (2015) ECS Transactions, 68 (1), pp. 1779-1790.
  4. MacWan, A., Marr, M., Kesler, O., Chen, D.L. Microstructure, hardness, and fracture toughness of suspension plasma sprayed yttria-stabilized zirconia electrolytes on stainless steel substrates (2015) Thin Solid Films, 584, pp. 23-28.
  5. Marr, M., Metcalfe, C., Fan, E.S.C., Kesler, O. Improved electrolyte performance in plasma sprayed SOFCs by electrode modification (2013) ECS Transactions, 57 (1), pp. 1025-1035.
  6. Kesler, O., Cuglietta, M., Harris, J., Kuhn, J., Marr, M., Metcalfe, C. Progress in metal-supported SOFCs using hydrogen and methane fuels (2013) ECS Transactions, 57 (1), pp. 491-501.
  7. Marr, M., Waldbillig, D., Kesler, O. The influence of process equipment on the properties of suspension plasma sprayed yttria-stabilized zirconia coatings (2012) Proceedings of the International Thermal Spray Conference, pp. 793-799.
  8. Cuglietta, M., Kesler, O. Fabrication of direct oxidation solid oxide fuel cell anodes using a novel atmospheric plasma spraying technique (2011) ECS Transactions, 35 (2 PART 2), pp. 1781-1790.
  9. Harris, J., Kesler, O. Performance of metal-supported composite and single-phase cathodes based on LSCF and SSC (2011) ECS Transactions, 35 (3 PART 3), pp. 1927-1934.
  10. Lay, E., Metcalfe, C., Kesler, O. Influence of tertiary phases incorporated into Ni-based cermets by Solution Precursor Plasma Spraying (SPPS) on anode stability (2011) ECS Transactions, 35 (2 PART 2), pp. 1303-1313.
  11. Metcalfe, C., Lay, E., Kesler, O. Measurement of Knudsen and effective ordinary diffusion coefficients in solid oxide fuel cell anodes fabricated by atmospheric plasma spraying using powder, suspension, and solution precursor feedstocks (2011) ECS Transactions, 35 (2 PART 2), pp. 1501-1511.
  12. Bateni, R., M., Nasirpour, M., Kesler, O. Synthesis of LNF nanoparticles for fuel cell applications (2010) Materials Research Society Symposium Proceedings, 1230, pp. 117-122.
  13. L. Rose, O. Kesler, C. Decès-Petit, T. Troczynski, T. Sobolyeva, R. Maric, Characterization of porous stainless steel 430 for low and intermediate temperature solid oxide fuel cell substrates, proceedings of the Hydrogen and Fuel Cells Conference 2009.
  14. J. Harris, O. Kesler, Fabrication of Composite LSCF-SDC Cathode Coatings by Plasma Spray Processing, proceedings of the SOFC XI Symposium of the 216th Electrochemical Society Meeting, October 2009.
  15. C. Metcalfe, O. Kesler, T. Rivard, F. Gitzhofer, and N. Abatzoglou, Three-phase Boundary Length Evaluation in Modeled Sintered Composite Solid Oxide Fuel Cell Electrodes, proceedings of the SOFC XI Symposium of the 216th Electrochemical Society Meeting, October 2009.
  16. X. Zhang, M. Robertson, C. Decès-Petit, O. Kesler, Composite Cathode Study for Low Temperature SOFCs, proceedings of the SOFC XI Symposium of the 216th Electrochemical Society Meeting, October 2009.
  17. J. Harris, O. Kesler, Atmospheric Plasma Spraying (APS) Low-Temperature Cathode Materials for Solid Oxide Fuel Cells (SOFCs), Proceedings of the International Thermal Spray Conference 2009.
  18. D. Waldbillig, O. Kesler, Z. Tang, A. Burgess, Effect of substrate and cathode parameters on the properties of suspension plasma sprayed solid oxide fuel cell electrolytes, Proceedings of the International Thermal Spray Conference 2008, February 29, 2008.
  19. B. D. White, O. Kesler, L. Rose, Electrochemical characterization of air plasma sprayed LSM/YSZ composite cathodes on metallic interconnects, ECS Transactions - Solid Oxide Fuel Cells X, vol. 7, Ed. K. Eguchi et al., June 2007, p. 1107-1115.
  20. X. Zhang, M. Robertson, C. Deces-Petit, W. Qu, M. Kyong-Bok, A. Tuck, Y. Xie, R. Hui, O. Kesler, R. Maric, D. Ghosh, Fabrication and characterization of cermet supported cell with SDC electrolyte, ECS Transactions - Solid Oxide Fuel Cells X, vol. 7, Ed. K. Eguchi, June 2007. p. 899-904.
  21. L. Rose, O. Kesler, Z. Tang, A. Burgess, Electrochemical testing of solid oxide fuel cells with sol gel impregnated plasma sprayed electrolytes, ECS Transactions - Solid Oxide Fuel Cells X, vol. 7, Ed. K. Eguchi, June 2007, p. 623-632.
  22. Z. Tang, A. Burgess, O. Kesler, B. D. White, N. Ben-Oved, Manufacturing Solid Oxide Fuel Cells with an Axial-Injection Plasma Spray System, Proceedings of the International Thermal Spray Conference 2007.
  23. L. Rose, Z. Tang, A. Burgess, O. Kesler, Improvement of Plasma Sprayed Yttria Stabilized Zirconia (YSZ) Electrolytes for Solid Oxide Fuel Cells by Spin Coated Sol Gel Solutions, Proceedings of the International Thermal Spray Conference 2007.
  24. D. Waldbillig, O. Kesler, Z. Tang, A. Burgess, Suspension plasma spraying of solid oxide fuel cell electrolytes, Proceedings of the International Thermal Spray Conference 2007.
  25. H. Chhina, S. Campbell, O. Kesler, Oxidation Resistant Indium Tin Oxide Catalyst Support for Proton Exchange Membrane Fuel Cells, Proceedings of the 210th Meeting of the Electrochemical Society, Cancun, Mexico, October 2006.
  26. O. Kesler, Plasma Spray Processing of Planar Solid Oxide Fuel Cells, Materials Science Forum, v. 539-543, (2007), p. 1385-1390.
  27. B. D. White, O. Kesler, Air Plasma Spraying of LSM/YSZ Composite SOFC Cathodes, Advanced Materials Research, Vol. 15-17, (2007), pp. 299-304.
  28. N. Ben Oved, O. Kesler, A New Technique for the Rapid Manufacturing of Direct-Oxidation Anodes for SOFCs, Advanced Materials Research, Vol. 15-17, (2007), pp. 287-292.
  29. L. Rose, M. Menon, K. Kammer, O. Kesler, P. Halvor Larsen, Processing of Ce1-xGdxO2-δ (GDC) thin films from precursors for application in solid oxide fuel cells, Advanced Materials Research, Vol. 15-17, (2007), pp. 293-298.
  30. X. Zhang, C. Deces-Petit, S. Yick, M. Robertson, Wei Qu, Yongsong Xie, Rob Hui, Edward Styles, Justin Roller, Olivera Kesler, Radenka Maric, Dave Ghosh, A Study on Co and Cu Oxides as Sintering Aids for Sm0.2Ce0.8O1.9 Electrolyte, Proceedings of the 1st International Symposium on Hydrogen and Fuel Cell Technologies, THERMEC, Vancouver, BC, July 2006, 1391-1396.
  31. B. D. White, O. Kesler, N. Ben-Oved, A. Burgess, Preparation of an SOFC LSM/YSZ Composite Cathode by Air Plasma Spraying, Proceedings of the International Thermal Spray Conference, Seattle, WA, May 2006.
  32. J. I. Gazzarri, O. Kesler, The Influence of a Delaminated Layer on the Impedance Spectrum of an Operating Solid Oxide Fuel Cell, in D.Ghosh (ed.) Fuel Cell and Hydrogen Technologies, COM2005, MetSoc, 2005.
  33. J. Jankovic, S. R. Hui, J. Roller, O. Kesler, Y. Xie, R. Maric, D. Ghosh, Deposition of porous cathodes using plasma spray technique for reduced-temperature SOFCs, in D.Ghosh (ed.) Fuel Cell and Hydrogen Technologies, COM2005, MetSoc, 2005.
  34. X. Zhang, M. Robertson, C. Deces-Petit, Y. Xie, R. Hui, S. Yick, E. Styles, M. Staite, J. Roller, O. Kesler, W. Qu, J. Jankovic, Z. Tang, D. Perednis, R. Maric, D. Ghosh, Ni-YSZ cermet substrate supported thin SDC and YSZ+SDC bi-layer SOFCs, in D.Ghosh (ed.) Fuel Cell and Hydrogen Technologies, COM2005, MetSoc, 2005.

Book Chapter

  1. O. Kesler, P. Marcazzan, "Processing", in Solid Oxide Fuel Cells: Materials Properties and Performance, CRC Press, Eds. J. W. Fergus, R. Hui, et al., 2009.