|
|
|
M2D SYMPOSIA |
|
A number of topical Symposia are organized under the auspices of the International Conference on Mechanics and Materials in Design. Interested authors should contact the coordinators directly. The following Symposia are available: EXPERIMENTAL MECHANICS IN DESIGN STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION PRODUCT DESIGN AND DEVELOPMENT
|
|
EXPERIMENTAL MECHANICS IN DESIGN Promoted by Mário A.P. VazDepartamento de Engenharia Mecânica e Gestão Industrial Faculdade de Engenharia – Universidade do Porto Rua Dr. Roberto Frias, 4200-465 Porto, Portugal Tel: 351-22 508 17 18; Fax: 351-22 508 15 84 E-mail: gmavaz@fe.up.pt
In Conjunction with
MECHANICS & MATERIALS IN DESIGN (M2D) 5th International Conference Faculty of Engineering, University of Porto PORTO, PORTUGALJuly 24-26, 2006
(http://paginas.fe.up.pt/~m2d/)
Papers are solicited in the following and related areas: General stress and strain analysis, strain-gauge measurements, pressure vessels and piping, vibration analysis, photoelasticity, holographic techniques, moiré analysis, residual stresses, thermoelasticity and thermography, data acquisition and processing, digital image processing, materials testing, elasticity, plasticity, creep, dynamic failure. Extended abstracts must not exceed two pages and should be written in the same format as the full papers for the CD-ROM (no limitation in length for these): Paper Size: A4 Margins: Top 1st page 4,0 cm; Top other pages 3,0 cm; Bottom 2,5 cm, Left & Right 2,5 cm Font and line spacing: imes New Roman; single space Title: Capital letters, size 14, bold, centered at one column Authors Names: Size 10, centered at one column, two lines interval from title above Authors affiliation: Size 10, centered at one column, two lines interval from text below Main Text: Size 12, full justification at one column, 6 pt space after paragraph, no indentation Headings: Capital letters, size 12, bold, one line interval from text above Legends (Figs & Tables): Size 10 References: References to cited literature should be identified in the text with author(s) name(s) and year of publication (ex: Mascarenhas, 1997). Full citations should be grouped at the end of the paper and in alphabetical order of first author’s name. Always give inclusive page numbers for references to journal articles and a page range for books. Each reference must be cited in the text. A sample abstract is available for download at: http://paginas.fe.up.pt/~m2d/abstract_sample.doc The Extended Abstracts are due by 24 FEBRUARY 2006, and those accepted will appear in a book which will be made available to delegates of M2D-5 during the event. Full papers will also be compiled in a CD-ROM and selected papers will be considered for publication in a number of scientific journals of international reputation. |
|
For additional information, please see the conference webpage at: or contact either of the following: |
|
Prof. Mário P. Vaz Departamento de Engenharia Mecânica
Faculdade de Engenharia, Universidade do Porto
|
Prof. J.F. Silva Gomes Departamento de Engenharia Mecânica
Faculdade de Engenharia, Universidade do Porto
|
|
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION Promoted by Carlos C. AntónioDepartamento de Engenharia Mecânica e Gestão Industrial Faculdade de Engenharia – Universidade do Porto Rua Dr. Roberto Frias, 4200-465 Porto, Portugal Tel: 351-22 508 17 66; Fax: 351-22 508 14 45
In Conjunction with
MECHANICS & MATERIALS IN DESIGN (M2D) 5th International Conference Faculty of Engineering, University of Porto PORTO, PORTUGALJuly 24-26, 2006
(http://paginas.fe.up.pt/~m2d/)
Papers are solicited in the following and related areas: Optimal design of structural elements and systems; optimal design with nonlinear and inelastic materials; reliability-based optimal design; optimal response of dynamic structures and systems; topology optimization; discrete structures optimization; optimization under stability constraints; optimization of metal forming; sensitivity analysis; mathematical programming; optimality criteria; genetic algorithms; evolutionary programming; integrated systems and software development. Extended abstracts must not exceed two pages and should be written in the same format as the full papers for the CD-ROM (no limitation in length for these): Paper Size: A4 Margins: Top 1st page 4,0 cm; Top other pages 3,0 cm; Bottom 2,5 cm, Left & Right 2,5 cm Font and line spacing: imes New Roman; single space Title: Capital letters, size 14, bold, centered at one column Authors Names: Size 10, centered at one column, two lines interval from title above Authors affiliation: Size 10, centered at one column, two lines interval from text below Main Text: Size 12, full justification at one column, 6 pt space after paragraph, no indentation Headings: Capital letters, size 12, bold, one line interval from text above Legends (Figs & Tables): Size 10 References: References to cited literature should be identified in the text with author(s) name(s) and year of publication (ex: Mascarenhas, 1997). Full citations should be grouped at the end of the paper and in alphabetical order of first author’s name. Always give inclusive page numbers for references to journal articles and a page range for books. Each reference must be cited in the text. A sample abstract is available for download at: http://paginas.fe.up.pt/~m2d/abstract_sample.doc The Extended Abstracts are due by 24 FEBRUARY 2006, and those accepted will appear in a book which will be made available to delegates of M2D-5 during the event. Full papers will also be compiled in a CD-ROM and selected papers will be considered for publication in a number of scientific journals of international reputation.
|
|
For additional information, please see the conference webpage at: or contact either of the following: |
|
Prof. Carlos C. António Departamento de Engenharia Mecânica
Faculdade de Engenharia, Universidade do Porto
|
Prof. J.F. Silva Gomes Departamento de Engenharia Mecânica
Faculdade de Engenharia, Universidade do Porto
|
|
PRODUCT DESIGN AND DEVELOPMENT Promoted by Arlindo José SilvaDepartamento de Engenharia Mecânica Instituto Superior Técnico – Universidade Técnica de Lisboa Av. Rovisco Pais, 1049-001 Lisboa, Portugal Tel: 351-21 841 77 23; Fax: 351-21 847 4045 E-mail: asilva@alfa.ist.utl.pt
In Conjunction with
MECHANICS & MATERIALS IN DESIGN (M2D) 5th International Conference Faculty of Engineering, University of Porto PORTO, PORTUGALJuly 24-26, 2006
(http://paginas.fe.up.pt/~m2d/)
Papers are solicited in the following and related areas: Innovation and creativity, product planning, product platforms, product architecture, industrial design, design for manufacturing and assembly, eco-design, design for the environment, creative methods of design, prototyping, intellectual property, product and design management, computer methods in product development, disruptive products, breakthrough products. Extended abstracts must not exceed two pages and should be written in the same format as the full papers for the CD-ROM (no limitation in length for these): Paper Size: A4 Margins: Top 1st page 4,0 cm; Top other pages 3,0 cm; Bottom 2,5 cm, Left & Right 2,5 cm Font and line spacing: imes New Roman; single space Title: Capital letters, size 14, bold, centered at one column Authors Names: Size 10, centered at one column, two lines interval from title above Authors affiliation: Size 10, centered at one column, two lines interval from text below Main Text: Size 12, full justification at one column, 6 pt space after paragraph, no indentation Headings: Capital letters, size 12, bold, one line interval from text above Legends (Figs & Tables): Size 10 References: References to cited literature should be identified in the text with author(s) name(s) and year of publication (ex: Mascarenhas, 1997). Full citations should be grouped at the end of the paper and in alphabetical order of first author’s name. Always give inclusive page numbers for references to journal articles and a page range for books. Each reference must be cited in the text. A sample abstract is available for download at: http://paginas.fe.up.pt/~m2d/abstract_sample.doc The Extended Abstracts are due by 24 FEBRUARY 2006, and those accepted will appear in a book which will be made available to delegates of M2D-5 during the event. Full papers will also be compiled in a CD-ROM and selected papers will be considered for publication in a number of scientific journals of international reputation. |
|
For additional information, please see the conference webpage at: or contact either of the following: |
|
Prof. Arlindo José Silva Departamento de Engenharia Mecânica
Instituto Superior Técnico - Universidade Técnica de Lisboa
|
Prof. J.F. Silva Gomes Departamento de Engenharia Mecânica
Faculdade de Engenharia, Universidade do Porto
|
|
®
Last update: Wednsday December 07, 2005. |