H.R. Salimi Jazi, J. Mostaghimi, T. Coyle, S. Chandra, C.Y. Lau, L. Rosenzweig, E. Moran, “Effect of Droplet Characteristics and Substrate Surface Topography on the Final Morphology of Plasma Sprayed Zirconia Single Splat”, Journal of Thermal Spray Technology, in press Nov. 2006.
H.R. Salimi Jazi, T. w. Coyle, M. Raessi, J. Mostaghimi, "Study of Solidification Behavior and Splat Morphology of Vacuum Plasma Sprayed Ti Alloy by Computational Modeling and Experimental observations”, Surface & Coating Technology, Accepted Dec. 2006.
A. Pourmousa, J. Mostaghimi, A. Abedini and S. Chandra, Particle Size Distribution in the Wire-Arc Spraying System” Journal of Thermal Spray Technology, 14, pp. 502-510 (2005).
M. Raessi and J. Mostaghimi, Three-dimensional Modeling of Density Variation due to Phase Change in Complex Free Surface Flows, Numerical Heat Transfer, Part B: Fundamentals, Vol. 47, pp. 507-531 (2005)
High temperature surface tension measurement, A. Moradian, J. Mostaghimi, 4th Triennial Special Issue of the IEEE Transactions on Plasma Science, Volume 33, Issue 2, pp. 410-411, 2005.
R. Dhiman and S. Chandra ““Freezing-Induced Splashing during Impact of Molten Metal Droplets with High Weber Numbers”, International Journal of Heat & Mass Transfer, 48, pp. 5625-5638 (2005).
Y. Heichal and S. Chandra, “Predicting Thermal Contact Resistance between Molten Metal Droplets and a Solid Surface”, Journal of Heat Transfer, 127, pp. 1269-1275 (2005).
V. Mehdi-Nejad, J. Mostaghimi, S. Chandra, “Modelling Interfacial Heat Transfer from Single or Multiple Deforming Droplets”, International Journal of Computational Fluid Dynamics 19, pp. 105-113 (2005).
N.Z. Mehdizadeh, M. Lamontagne, C. Moreau, S. Chandra, J. Mostaghimi, Photographing Impact of Molten Molybdenum Particles in a Plasma Spray, Journal of Thermal Spray Technology14, 354-361 (2005).
R. Ghafouri-Azar, Z. Yang, S. Chandra, J . Mostaghimi, “Impact of Molten Metal Droplets on the Tip of a Pin Projecting from a Flat Surface”, International Journal of Heat and Fluid Flow, 26, pp. 334-347 (2005).
S. Cheng, T. Li and S. Chandra, “Producing molten metal droplets with a pneumatic droplet-on-demand generator” Journal of Materials Processing Technology,159, pp. 295-302 (2005).
L. Hulse-Smith, N. Z. Mehdizadeh and S. Chandra, “Deducing Droplet Size and Impact Velocity from Circular Bloodstains”, Journal of Forensic Sciences, 50, pp. 1-10 (2005).
N. Z. Mehdizadeh, M. Raessi, S. Chandra, and J. Mostaghimi, Effect of Substrate Temperature on Splashing of Molten Tin Droplets, ASME Journal of Heat Transfer, Vol. 126, pp. 445-452 (2004).
Q. Cui, S. Chandra, S. McCahan, “Spray Cooling Hot Surfaces with Water containing Dissolved Salts” Journal of Energy, Heat and Mass Transfer, 26, pp.165-180 (2004).
V. Mehdi-Nejad, S. Chandra, J. Mostaghimi, “Modelling Heat Transfer in Two-Fluid Interfacial Flows”, International Journal of Numerical Methods in Engineering., 61, pp. 1028-1048 (2004).
N. Z. Mehdizadeh, S. Chandra, and J. Mostaghimi, “Formation of fingers around the edges of a drop hitting a metal plate with high velocity”, Journal of Fluid Mechanics, 510, pp. 353-373 (2004).
R. Ghafouri-Azar, J. Mostaghimi, S. Chandra, “Numerical study of impact and solidification of a droplet over a deposited frozen splat” International Journal of Computational Fluid Dynamics18, 133 – 138 (2004).
R. Ghafouri-Azar, J. Mostaghimi, S. Chandra and M. Charmchi, “A Stochastic Model to Simulate the Formation of a Thermal Spray Coating”, Journal of Thermal Spray Technology,12, pp.53-69, 2003.
K.C. Paul, T. Ishigaki, J. Mostaghimi and T. Sakuta, “Non-equilibrated situations of Pulse Modulated Ar-H2 and Ar-N2 Thermal Plasmas at Atmospheric pressure”, Journal of Applied Physics 93, pp. 8867-8875, June 2003.
V. Mehdi-Nejad, J. Mostaghimi and S. Chandra, “Air Bubble Entrapment under an Impacting Droplet”, Physics of Fluids, 15, pp. 173-183, 2003.
Navid Z. Mehdizadeh, S. Chandra and J. Mostaghimi, “Adhesion of Tin Droplets impinging on a stainless Steel Plate: Effect of Substrate Temperature and Roughness”, Journal of Science and Technology of Advanced Materials 4, pp. 173-181, 2003.
S. Cheng and S. Chandra “A pneumatic droplet-on-demand generator” Experiments in Fluids, 34, 755-762 (2003).
Q. Cui, S. Chandra, S. McCahan, “The effect of dissolving salts in water sprays used for quenching a hot surface. Part 1: Boiling of single droplets”, Journal of Heat Transfer,125, pp. 326-332 (2003).
Q. Cui, S. Chandra, S. McCahan, “The effect of dissolving salts in water sprays used for quenching a hot surface. Part 2: Spray cooling”, Journal of Heat Transfer, 125, pp. 333-338 (2003).
R. Ghafouri-Azar, S. Shakeri, S. Chandra and J. Mostaghimi, “Interactions between molten metal droplets impinging on a solid surface”, International Journal of Heat and Mass Transfer, 46, pp. 1395-1407 (2003).
J. Mostaghimi, M. Pasandideh-Fard, S. Chandra, “Dynamics of Splat Formation in Plasma Spray Coating Process “,Plasma Chemistry and Plasma Processing,22, pp. 59-84, 2002.
M. Pasandideh-Fard, S. Chandra and J. Mostaghimi, “A Three-Dimensional Model of Droplet Impact and Solidification”, International Journal of Heat & Mass Transfer, 45, pp. 2229-2242, 2002.
M. Bussmann, J. Mostaghimi, D. W. Kirk, and J. W. Graydon, “A Numerical Study of Steady Flow and Temperature Fields Within a Melt Spinning Puddle”, International Journal of Heat & Mass Transfer,45, pp. 3997-4010, 2002.
(Invited) J. Mostaghimi and S. Chandra, “Splat Formation in Plasma Spray Coating Process”, Journal of Pure and Applied Chemistry,74, pp. 441-445, 2002.
M. Pasandideh-Fard, V. Pershin, S. Chandra, and J. Mostaghimi, “Splat Shapes in a Thermal Spray Coating Process: Simulations and Experiments”, Journal of Thermal Spray Technology,11, pp. 206-217, 2002.
M. Pasandideh-Fard, M. Bussmann, S. Chandra and J. Mostaghimi, “Simulating Droplet Impact on a Substrate of Arbitrary Shape”, Atomization and Sprays, 11, pp. 397-414, 2001.
S. Shakeri and S. Chandra, “Splashing of molten tin droplets on a rough steel surface”, International Journal of Heat and Mass Transfer, 45, pp. 4561-4575 (2002)
M. Pasandideh-Fard, S. D. Aziz, S. Chandra and J. Mostaghimi, "Cooling Effectiveness During the Impact of Cold Water Droplets on a Hot Steel Plate: Simulations and Experiments",International Journal of Heat and Fluid Flow, 22, pp. 201-210, 2001.
Q. Cui, S. Chandra, S. McCahan, “The effect of dissolving gases or solids in water droplets boiling on a hot surface”, Journal of Heat Transfer, in press
S.D. Aziz, S. Chandra, “Impact, recoil and splashing of molten metal droplets”, International Journal of Heat and Mass Transfer 43 pp. 2841-2857 2000.
Y. K .Chae, J. Mostaghimi and T. Yoshida, “Deformation and Solidification Process of a Super-Cooled Droplet Impacting on the Substrate Under Plasma Spraying Conditions”, Journal of Science & Technology of Advanced Materials,1, pp. 147-156, 2000.
M. Bussmann, S. Chandra, J. Mostaghimi, “Modelling the Splash of a Droplet Impacting a Solid Surface”, Physics of Fluids, 12, pp. 3121-3132, 2000.
M. Bussmann, S. D. Aziz, S. Chandra, and J. Mostaghimi, “Photographs and Simulations of Molten Metal Droplets Landing on a Solid Surface”, Gallery of Heat Transfer, Journal of Heat Transfer, 122, pp. 421, 2000.
R. Bhola and S. Chandra “Parameters controlling solidification of molten wax droplets falling on a solid surface”, Journal of Materials Science , 34, pp. 4883-4894, 1999.
M. Bussmann. J. Mostaghimi and S. Chandra, "On a Three-Dimensional Volume Tracking Model of Droplet Impact," Physics of Fluids, Vol. 11, pp. 1406-1417, 1999. PDF (3.5 Mb)
K. Sobolewski, J. Mostaghimi and H. Tran, "Modelling of Particle Deposition on Superheater Tubes in Kraft Recovery Boilers",Int. J. Modelling & Simulation, 19, pp.262-270, 1999.
J. Mostaghimi, “Modelling Droplet Impact in Plasma Spray Processes, Pure & Applied Chemistry, 70, pp., 1209-1215, 1998. (Invited review paper).
M. Pasandideh-Fard, R. Bhola, S. Chandra and J. Mostaghimi, "Deposition of tin droplets on a steel plate: simulations and experiments," International Journal of Heat and Mass Transfer, Vol. 41, pp 2929-2945, 1998. PDF (2.4 Mb)
Y.M Qiao and S. Chandra “Spray cooling enhancement by addition of a surfactant”, Journal of Heat Transfer, 120, pp. 92-98 1998
M. Bussmann, S. Chandra and J. Mostaghimi “Three-dimensional droplet impact”, Physics of Fluids , 9, S7 (1997).(winner of the American Physical Society’s Gallery of Fluid Motion Award).
Y.M. Qiao and S. Chandra, “Experiments on adding a surfactant to water droplets boiling on a hot surface” Proceedings of the Royal Society of London , A 453, pp. 673-689 1997.
S. Chandra, M. di Marzo, Y. M. Qiao and P. Tartarini, “Effect of liquid-solid contact angle on droplet evaporation”, Fire Safety Journal 27, pp. 141-158 1996.
M. Pasandideh-Fard, Y.M. Qiao, S. Chandra and J. Mostaghimi, "Capillary effects during droplet impact on a solid surface,"Physics of Fluids, Vol. 8, pp 650-659, 1996.
M. Pasandideh-Fard and J. Mostaghimi, "On the spreading and solidification of molten particles in a plasma spray process: effect of thermal contact resistance," Plasma Chemistry and Plasma Processing, Vol. 16, pp 83S-98S, 1996.
Y. M. Qiao and S. Chandra, “Boiling of droplets on a hot surface in low gravity”, International Journal of Heat and Mass Transfer, 39, pp. 1379-1393, 1996.
J. Buckel and S. Chandra “Hot wire ignition of hydrogen-oxygen mixtures”, International Journal of Hydrogen Energy 21, pp. 39-44, 1996.
M. Pasandideh-Fard, P. Chen, J. Mostaghimi and A.W. Neumann, "The Generalized Laplace Equation of Capillarity I. Hydrostatic Derivation of the Fundamental Equation", Advances in Colloids and Interface Science, 63, pp. 151-177, 1996.
P. Chen, S.S. Susnar, M. Pasandideh-Fard, J. Mostaghimi and A.W. Neumann, "The Generalized Laplace Equation of Capillarity II. Hydrostatic and Thermodynamic Derivations", Advances in Colloids and Interface Science, 63, pp. 179-193, 1996.
Y. M. Qiao and S. Chandra, “Impact of n-heptane droplets on a hot surface in low gravity”, Transactions of the CSME 19, pp. 271-284 1995.
B. Cox, Y-M. Wong and J. Mostaghimi, “High Conductivity Porous Oxides on Zr-2.5% wt. Nb",J. Nuc. Materials, 226, pp. 272-276, 1995.
X. H. Shen, D.S.C. Kuhn, H. Tran, J. Mostaghimi and C. Dees, "Simulation of Flue Gas Flow in the Upper Furnace of a Recovery Boiler", Pulp & Paper Canada, 96, 171-175, 1995.
F. Chabchoub, S.A. Argyropoulos and J. Mostaghimi, "Mathematical Modelling and Experimental Measurements on the OHNO Continuous Casting", Canadian Metallurgical Quarterly, 33, pp. 73-88, 1994.(Best paper of the Year)
S. Chandra and S. D. Aziz, “Leidenfrost evaporation of liquid nitrogen droplets”, ASME Journal of Heat Transfer ,116, pp. 999-1006 1994.
S. Chandra, P. A. Lindsey and N. L. Bassuk, “A gauge to measure the mass flow rate of water in trees”, Plant, Cell and Environment 17, pp. 867-874, 1994.
S. Chandra and C. T. Avedisian, “Observations of droplet impingement on a ceramic porous surface”, International Journal of Heat and Mass Transfer, 35, pp. 2377-2388, (1992)
S. Chandra and C. T. Avedisian, “On the collision of a droplet with a solid surface”, Proceedings of the Royal Society of London, A 432, pp. 13-41, 1991.
S. Chandra and C. T. Avedisian, “The collision of a droplet with a solid surface”, Physics of Fluids, A 2, p.1525, 1990.
S. Chandra and C. T. Avedisian, “Droplet combustion near a cold surface”, Proceedings of the Royal Society of London , A 429, pp. 481-503, (1990)
S. Chandra and C. T. Avedisian, “The evaporation and combustion of levitated arrays of two, three, and five droplets at a hot surface”, Proceedings of the Royal Society of London A 418, pp. 365-382, 1988.
H. B. Parizi, H.R. Salimi Jazi, J. Mostaghimi, T. Coyle, V. Pershin, S. Chandra, A. McDonald, L. Rosenzweig, and C. Moreau, “Numerical Simulation of Droplet Impact on Patterned Surfaces”, 2007 International Thermal Spray Conference & Exposition, May 2007, Beijing, China.
H.R. Salimi Jazi, J. Mostaghimi, T. Coyle, V. Pershin, L. Rosenzweig, and E. Moran, “Effect of Substrate Temperature and Droplet Characteristics on Plasma Sprayed Zirconia Splats”, 2006 International Thermal Spray Conference & Exposition, May 15-18, 2006, Seattle, Washington, USA.
M. Xue, J. Mostaghimi and S. Chandra, Numerical simulation of coating deposition in a thermal spray process, International Heat Transfer Conference IHTC-13, Sydney, Australia, August 13-18, 2006.
M. Xue, J. Mostaghimi and S. Chandra, Investigation of splat curling up in thermal spray coatings, The Conference of International Thermal Spray, Seattle, Washington USA, May 15-17, 2006.
M. Xue, J. Mostaghimi and S. Chandra, Formation of pores in thermal spray coatings due to incomplete filling of voids under solid particles, The Conference of International Thermal Spray, Seattle, Washington USA, May 15-17, 2006.
R. Li, N Ashgriz, S. Chandra, J. R. Andrews, S. Drappel, “Apparent Solidification Contact Angles of Micro-droplets of Hot Melt Ink Deposited on Solid Surfaces”, Proceeding of the Fifth International Symposium on Contact Angle, Wettability and Adhesion, Toronto, Ontario, June 21-23, (2006).
A. Amirzadeh Goghari, S. Chandra, “Producing Droplets Smaller than the Nozzle Diameter by Using a Pneumatic Droplet Generator”, Proceedings of ILASS Americas, 19th Annual Conference on Liquid Atomization and Spray Systems, Toronto, Ontario, May 23-26 (2006).
A. McDonald, S. Chandra , M. Lamontagne, C. Moreau, “Spreading of Plasma-Sprayed Molybdenum Particles on Glass and Metal Substrates”, Proceedings of ILASS Americas, 19th Annual Conference on Liquid Atomization and Spray Systems, Toronto, Ontario, May 23-26 (2006).
A. McDonald, S. Chandra, C. Moreau, “Impact of Partially Molten Plasma Sprayed Zirconia Particles on Glass Surfaces”, Proceedings of the International Thermal Spray Conference, Seattle Washington, May 15-18 (2006).
A. McDonald, S. Chandra , M. Lamontagne, C. Moreau, Photographing Impact of Plasma-Sprayed Particles on Metal Substrates”, Proceedings of the International Thermal Spray Conference, Seattle Washington, May 15-18 (2006).
A. McDonald, M. Raessi, S. Chandra, J. Mostaghimi, C. Moreau and M. Lamontagne, Fragmentation of Plasma-Sprayed Molybdenum Particles on Glass Surfaces”, Proceedings of the International Thermal Spray Conference, Seattle Washington, May 15-18 (2006).
A. McDonald, M. Lamontagne, S. Chandra , C. Moreau, “Photographing Impact of Plasma-Sprayed Molybdenum, Armacor and Zirconia Particles on Hot and Cold Glass Substrates” Proceedings of the 17th international Symposium on Plasma Chemistry, Toronto, Ontario, August 7-12 (2005).
M. Fang, S. Chandra, C. B. Park, “Experiments on Remelting and Solidification of Molten Metal Droplets Deposited in Vertical Columns, Proceedings of 2005 ASME Summer Heat Transfer Conference, San Francisco, California, July 17- 22, (2005).
Y. Heichal, S. Chandra, “Measuring Thermal Contact Resistance between a Molten Metal Dropelt and a Solid Wall, Proceedings of 2005 ASME Summer Heat Transfer Conference, San Francisco, California, July 17- 22, (2005).
R. Li and N. Ashgriz and S. Chandra” Experimental Study on Micro-droplets of Molten Wax Impacting on Solid Surfaces” 38th AIAA Thermophysics Conference, Toronto, Ontario June 6-9 (2005).
A. McDonald, M. Lamontagne, C. Moreau, S. Chandra, “Visualization of Plasma-Sprayed Molybdenum Particles on Hot and Cold Glass Substrates”, Proceedings of the International Thermal Spray Conference, Basel, Switzerland, May 2-4 (2005)
Y. Heichal, M. Xue, S. Chandra and J. Mostaghimi, Measuring thermal contact resistance between molten aluminum droplets and a steel plate, The Conference of International Thermal Spray, Basel, Switzerland, May 2-4, 2005.
M. Raessi, J. Mostaghimi, and M. Bussmann, Impact and Solidification of Droplets onto Rough Substrates, Proceeding of the International Thermal Spray Conference, Basel, Switzerland, May 2-4, 2005.
H.R. Salimijazi, M. Raessi, T. Coyle, and J. Mostaghimi, Numerical Simulation and Experimental Evaluation of Solidification Behavior of Vacuum Plasma Sprayed Ti-6Al-4V Alloy, Proceeding of 17th International Symposium on Plasma Chemistry, Toronto, Canada, August 7-12, 2005.
M. Raessi, J. Mostaghimi, and M. Bussmann, Droplet Impact during the Plasma Spray Process- Effect of Surface Roughness on Splat Shapes, Proceeding of 17th International Symposium on Plasma Chemistry, Toronto, Canada, August 7-12, 2005.
High-temperature Tensiometry by a Coupled Modeling and Experimental Approach, A. Moradian, J. Mostaghimi, Proceeding of the International Thermal Spray Conference, Basel, Switzerland, May 2-6, 2005.
Surface tension measurement at high temperatures, A. Moradian, J. Mostaghimi, ASME International Mechanical Engineering Congress, Florida, Nov. 5-11, 2005.
A new surface tension measurement technique for high-melting-point materials, A. Moradian, J. Mostaghimi, Proc. International Symposium Plasma Chemistry, Toronto, Canada, August 2005.
Measurement of Thermo-Physical Properties of Melts by Drop Oscillation Method, A. Moradian, J. Mostaghimi, American Ceramic Society, Proc. 9th Biennial Worldwide Congress on Refractories, UNITECR 2005, Orlando, Florida, Nov. 8-11, 2005.
J. Mostaghimi and M. Raessi, Heat Transfer in Thermal Spray Coatings, XVII National and VI ISHMT/ASME Heat and Mass Transfer Conference, IGCAR, Kalpakkam, India, Jan. 5-7, 2004 HMT-2004-K2, pp. 8-17.
M. Xue and J. Mostaghimi, A Stochastic model for predicting the coating microstructure, The Thermal Spray Consortium at The Centre for Advanced Coating Technologies of University of Toronto, Toronto, September 21, 2004.
M. Xue, J. Mostaghimi and S. Chandra, Prediction of coating microstructure, The Conference of International Thermal Spray, Osaka, Japan, May 10-12, 2004
A novel method to measure surface tension of high melting point materials, A. Moradian, J. Mostaghimi, XVth Proceeding, Int. Conf. Gas Discharges and their Applications, pp. 1097-1100, Toulouse, France, Sept. 5-10, 2004.
N. Z. Mehdizadeh, M. Raessi, S. Chandra, and J. Mostaghimi, Effect of Substrate Temperature on Splashing of Molten Tin Droplets, XVII National and VI ISHMT/ASME Heat and Mass Transfer Conference, IGCAR, Kalpakkam, India, Jan. 5-7, 2004, HMT-2004-C042, pp. 244-249.
V. Mehdi-Nejad, J. Mostaghimi, S. Chandra, “Effect of Interfacial Heat Transfer on Molten Tin Jet Break-up in an Oil Tank” Paper HT-FED2004-56052, Proceedings of2004 ASMEHeat Transfer/Fluids Engineering Summer Conference, Charlotte, North Carolina, July 11-15, 2004.
M. Fang, S. Chandra, C. B. Park, “Remelting and coalescence of molten metal droplets deposited on a plate” Paper HT-FED2004-56321, Proceedings of2004 ASMEHeat Transfer/Fluids Engineering Summer Conference, Charlotte, North Carolina, July 11-15, 2004
N. Z. Mehdizadeh, S. Chandra, ”Effect of Impact Velocity and Substrate Temperature on Boiling of Water Droplets Impinging on a Hot Stainless Steel Surface” Paper HT-FED2004-56179, Proceedings of2004 ASMEHeat Transfer/Fluids Engineering Summer Conference, Charlotte, North Carolina, July 11-15, 2004
R. Dhiman, S. Chandra, “Effect of Substrate Temperature on Splashing of Molten Metal Droplets, ” Paper HT-FED2004-56096, Proceedings of2004 ASMEHeat Transfer/Fluids Engineering Summer Conference, Charlotte, North Carolina, July 11-15, 2004.
N.Z. Mehdizadeh, M. Lamontagne, C. Moreau, S. Chandra, J. Mostaghimi“Photographing High Velocity Impact of Molten Molybdenum Droplets” 17th Annual Conference on Liquid Atomization and Spray Systems, Arlington, VA, 16-19 May 2004
A. Pourmousa, A. Abedini, S. Chandra, J. Mostaghimi, “Particle Diagnostics in Wire Arc Spraying System” Proceedings of the International Thermal Spray Conference, Osaka, Japan, May 10-12 (2004).
A. Abedini, A. Pourmousa, S. Chandra, J. Mostaghimi, Splat Formation in Wire Arc Spraying, Proceedings of the International Thermal Spray Conference, Osaka, Japan, 2004.
R. Dhiman, S. Chandra, “Interactions Between Molten Metal Splats Landing on a Substrate during Coating Formation”, Proceedings of the International Thermal Spray Conference, Osaka, Japan, May 10-12 (2004).
M. Raessi and J. Mostaghimi, Three-dimensional Modeling of Solidification Shrinkage, Proceeding of the 11th Annual Conference of the CFD Society of Canada, Vancouver, May28-30, 2003, pp.74-79.
R. Ghafouri-Azar, J. Mostaghimi and S. Chandra, “A stochastic model of plasma sprayed coating formation”, Proceedings of the 15th International Symposium on Plasma Chemistry, Orleans, France July 9-13, 2001.
N. Z. Mehdizadeh, S. Chandra, J. Mostaghimi, “Splashing of a small molten tin droplet impinging on a solid surface at high velocity”, Proceedings of the 35th National Heat Transfer Conference, Anaheim, California, June 10-12, (2001)
M. Pasandideh-Fard, J. Mostaghimi, and S. Chandra, “3D Model of the Impact and Solidification of a Droplet on a Solid Surface “, 15th AIAA 2001-2567, Anaheim, CA, June 11-14, 2001
C. Moreau, J.F. Bisson, M. Lamontagne, S-W Fu, J. Mostaghimi, S. Chandra, M. Pasandideh-Fard, “Monitoring and Simulation of the Plasma Sprayed Droplet Impact Process”, Proceedings of the International Thermal Spray Conference 2001, Singapore, May 28-30, 2001
V. L. Pershin, M. Pasandideh-Fard, S. Chandra, J. Mostaghimi, “Effect of Substrate Properties on the Formation of Plasma Sprayed Alumina Splats”, Proceedings of the International Thermal Spray Conference 2001, Singapore, May 28-30, 2001
R. Ghafouri-Azar, J. Mostaghimi, and S. Chandra, “Deposition Model of Thermal Spray Coating”, Proceedings of the International Thermal Spray Conference 2001, Singapore, May 28-30, 2001
V. Mehdi-Nejad, J. Mostaghimi, and S. Chandra, “Tracking A Free Fluid Surface Problem Using a Semi-Implicit Multigrid Method”, 9th CFD Society of Canada, Waterloo, May 27-29, 2001
R. Ghafouri-Azar, S. Chandra and J. Mostaghimi, “Modeling thermal spray deposition with moving and stationary spray guns”, 14th Annual Conference on Liquid Atomization and Spray Systems, Dearborn, Michigan, pp. 152-156, May 20-23, 2001.
M. Pasandideh-Fard, J. Mostaghimi and S. Chandra, “3D Model of the impact and solidification of a droplet on a solid surface, AIAA 2001-2567, National Heat Transfer Conference, Anaheim, California, June 10-12 (2001)
N. Z. Mehdizadeh, S. Chandra. J. Mostaghimi, “Splashing of a small droplet impinging on a surface at high velocity”, Paper HTD2-15-7-5, Proceedings of the 2000 International Mechanical Engineering Congress and Exposition, Orlando, Florida, November 5-10, (2000)
M. Pasandideh-Fard, V. Pershin, I. Thomson, J. Mostaghimi and S. Chandra, “Thermal spray coating formation: simulations and experiments”, Paper No. NHTC 2000-12181, National Heat Transfer Conference, Pittsburgh, Pennsylvania, August 20-22, (2000)
Q. Cui, S. Chandra, S. McCahan, “Enhanced boiling of water droplets containing dissolved gases or solids”, Paper No. NHTC 2000-12249, National Heat Transfer Conference, Pittsburgh, Pennsylvania, August 20-22, (2000)
M. Pasandideh-Fard, M. Bussmann, S. Chandra and J. Mostaghimi, “Droplet impact on a tube: simulations and experiments”, 8th International Conference on Liquid Atomization and Spray Systems, Pasadena, California, July 16-20, 2000.
V. Mehdi-Nejad, J. Mostaghimi, and S. Chandra, “Effect of Surrounding Gas on Droplet Impact”, 8th CFD Society of Canada, Montreal, Quebec, pp. 567-574, June 11-13, 2000
M. Pasandideh-Fard, M. Bussmann, S. Chandra and J. Mostaghimi, “On a 3D Computational Model of Free Surface Flows Including Internal Obstacles”, 8th CFD Society of Canada, Montreal, Quebec, pp. 603-610, June 11-13, 2000.
V. Pershin, I. Thomson, S. Chandra and J. Mostaghimi, “Splashing of nickel droplets during plasma spraying”, Proceeedings of the 1st International Thermal Spray Conference, pp. 721-727, Montréal, Quebec, May 8-11, 2000.
M. Pasandideh-Fard, S. D. Aziz, S. Chandra and J. Mostaghimi, “Numerical simulation of thermal spray coating formation”, Proceeedings of the 1st International Thermal Spray Conference, pp. 125-134, Montréal, Quebec, May 8-11, (2000)
M. Pasandideh-Fard, S.D. Aziz, S. Chandra and J. Mostaghimi, "Surface Cooling by an Impinging Water Drop," paper HTD99-89, 33rd National Heat Transfer Conference, Albuquerque, NM, August 15-17, 1999.PDF (2.5 Mb)
V. Pershin, I. Thomson, S. Chandra and J. Mostaghimi, “Nickel splat formation during plasma spraying”, Proceedings of the 14th International Symposium on Plasma Chemistry, pp. 2089-2094, Prague, Czech Republic, August 2-6, (1999)
I. Thomson, V. Pershin, J. Mostaghimi and S. Chandra, “New design for injection of shrouding gas in plasma spraying: experimental validation of a numerical model”, Proceedings of the 14th International Symposium on Plasma Chemistry, pp. 451-454, Prague, Czech Republic, August 2-6, (1999)
M. Pasandideh-Fard, S. Chandra and J. Mostaghimi, “3D model of Droplet impact and solidification: impact on a solidified splat”, Proceedings of the 14th International Symposium on Plasma Chemistry , pp. 2081-2087, Prague, Czech Republic, August 2-6, (1999)
M. Pasandideh-Fard, J. Mostaghimi and S. Chandra, "On a Three-Dimensional Model of Free Surface Flows with Heat Transfer and Solidification," paper FEDSM99-7112, 3rd ASME/JSME Joint Fluids Engineering Conference, San Francisco, CA, July 18-23, 1999. PDF (0.2 Mb)
M. Pasandideh-Fard, J. Mostaghimi and S. Chandra, "Modeling Sequential Impact of Two Molten Droplets on a Solid Surface," ILASS-Americas 12th Annual Conference on Liquid Atomization and Spray Systems, Indianapolis, IN, May 16-19, 1999. PDF (0.1 Mb)
(Best Paper Award) M. Bussmann, S. Chandra and J. Mostaghimi, "Numerical results of off-angle thermal spray particle impact," Proceedings of UTSC'99, pp 783-786, Düsseldorf, Germany, March 17-19, 1999. PDF (0.1 Mb)
M. Bussmann, J. Mostaghimi, S. Chandra and H.N. Tran, "Numerical Modelling of Carryover Deposition in Kraft Recovery Boilers," Proceedings of the 1998 TAPPI International Engineering Conference, pp 193-208, Miami, FL, September 13-17, 1998. PDF (13.6 Mb)
M. Bussmann, S.D. Aziz, J. Mostaghimi and S. Chandra, “Modelling the fingering of impacting droplets”, Proceedings of Canadian CFD Conference, pp. 43-48, Québec City, Québec, June 6-8 (1998)
M. Bussmann, S. Chandra and J. Mostaghimi, “3-D Modelling of thermal spray droplet splashing”, Proceedings of the 15th International Thermal Spray Conference, pp. 413-418, Nice, France, May 25-29 (1998)
M. Pasandideh-Fard, R. Bhola, S. Chandra and J. Mostaghimi, “Droplet impact and solidification: comparison of experimental and numerical results” ASME HTD Vol. 347-9, pp. 21-29, presented at the National Heat Transfer Conference, Baltimore, Maryland, August 10-12 (1997)
M. Bussmann, S. Chandra and J. Mostaghimi “Droplet impact onto surfaces of arbitrary geometry”, paper no. FEDSM 97-3073 presented at the ASME Fluids Engineering Division Summer Meeting, Vancouver, British Columbia, June 22-26 (1997)
R. Bhola and S. Chandra, “Deformation of molten metal droplets during impact on a solid substrate”, Proceedings of the 10th Annual Conference on Liquid Atomization and Spray Systems, pp. 160-164, Ottawa, Ontario May 18-21 (1997)
R. Bhola and S. Chandra, “Splat solidification of tin droplets”, Proceedings of the 9th National Thermal Spray Conference, pp. 657-663, Cincinnati, Ohio, October 7-11 (1996)
M. Bussmann, J. Mostaghimi, S. Chandra, “On a three-dimensional model of droplet impact” Proceedings of the Asia-Pacific Conference on Plasma Science & Technology, 1, pp. 95-100, Tokyo, July 15-17 (1996)
M. Pasandideh-Fard and J. Mostaghimi, "Droplet impact and solidification in a thermal spray process: droplet-substrate interactions", Proceedings of the 9th National Thermal Spray Conference, pp 637-646, Cincinnati, Ohio, October 7-11, (1996)
S. Tinker, M. di Marzo, P. Tartarini, S. Chandra, and Y. M. Qiao, “Dropwise evaporative cooling: Effect of dissolved gases and effect of surfactants” Proceedings of the International Conference on Fire Research and Engineering, pp. 91-96 Orlando, Florida, September 10-15 (1995)
M. Pasandideh-Fard, Y. M. Qiao, S. Chandra and J. Mostaghimi, “The effect of surface tension and contact angle on the spreading process of a droplet impacting onto a substrate”, ASME FED Vol. 218, pp. 53-61, presented at the ASME/JSME Fluids Engineering Conference, Hilton Head, South Carolina, August 13-18 (1995)
R. Bhola and S. Chandra, “Freezing of droplets colliding with a cold surface”, ASME HTD Vol. 306, pp. 181-190, presented at the National Heat Transfer Conference, Portland, Oregon, August 5-9, (1995)
Y. M. Qiao and S. Chandra, “The Leidenfrost temperature in low gravity”, ASME HTD Vol. 305, pp. 49-60, presented at the National Heat Transfer Conference, Portland, Oregon, August 5-9, (1995)
Y. M. Qiao and S. Chandra, “Evaporative cooling enhancement by addition of surfactant to water drops on a hot surface”, ASME HTD Vol. 304-2, pp. 63-71 presented at the National Heat Transfer Conference, Portland, Oregon, August 5-9, (1995)
M. Pasandideh-Fard and J. Mostaghimi, "Deformation and solidification of molten particles on a substrate in thermal plasma spraying," Proceedings of the 7th National Thermal Spray Conference, Boston, Massachusetts, pp 405-414, (1994)
Y. M. Qiao and S. Chandra, “A photographic study of n-heptane droplets boiling on a hot surface at low gravity”, Proceedings of the CSME Forum1994 1, pp. 396-407, Montreal June 27-29 (1994)
S. Chandra and S. D. Aziz, “The evaporation of a liquid nitrogen droplet on a solid surface”, AIChE Symposium Series, Vol. 89 (295), pp. 36-43, presented at the 30th National Heat Transfer Conference, Atlanta, Georgia, August 8-11 (1993)
S. Chandra, P. A. Lindsey and N. L. Bassuk, “Measurement of the mass flow rate of water in trees”, ASME HTD Vol. 206-2, pp. 19-27, presented at the 29th National Heat Transfer Conference, San Diego, California, August 9-12 (1992)
S. Chandra and C. T. Avedisian, “Droplet impact on a porous surface”, ASME-HTD Vol. 159, pp. 17-25, presented at the 28th National Heat Transfer Conference, Minneapolis, Minnesota, July 28-31 (1991)
S. Chandra and C. T. Avedisian, “Experiments on film evaporation and combustion of binary linear droplet arrays at a hot surface”, ASME Paper No. 87-HT-54, presented at the 24th National Heat Transfer Conference, Pittsburgh, Pennsylvania, Aug. 9-12 (1987).
(Invited) J. Mostaghimi, “Dynamics of Droplet Impact in Plasma Spray Processes”, 15th International Symposium on Plasma Chemistry, Orleans, France, July 9-13, (2001)
(Invited Talk) S. Chandra, “Formation of Splats in Plasma Spray Coating: Experiments and Modelling”, Tilton, New Hampshire, August 13-18 (2000)
S. Chandra, T. Li, “Manufacturing uniform sized meal spheres”, Materials and Manufacturing Ontario Partnerships 2000, Toronto, Ontario, June 15 (2000)
(Plenary) J. Mostaghimi, “Mathematical Modelling of Thermal Spray Coating Processes: Present Status and Future Prospects”, International Thermal Spray Conference, Montreal, Canada, May 8 – 11, (2000)
J. Mostaghimi, “Numerical Simulation of Thermal Spray Coating Formation”, Int’l Thermal Spray Conference, Montreal, Canada, May 8 – 11, 2000 Certificate of Merit Award
J. Mostaghimi, “A Non Equilibrium Model of the RF-ICP“, Winter Conference on Plasma Spectrochemistry, Ft. Lauderdale, Florida, January 10-15, (2000)
(Invited) J. Mostaghimi, “Modelling Of The Formation of Thermal Spray Coatings”, Materials Research Society, Boston, Massachusetts, November 29-December 3, (1999)
M. Bussmann, S.D. Aziz, S. Chandra and J. Mostaghimi, “Photographs and simulations of molten metals landing on a solid surface”, International Mechanical Engineering Congress and Exposition, Nashville, Tennessee November 14-19 (1999)
(Invited) J. Mostaghimi, “Splat Morphology in Thermal Spray Coatings: Simulations and Experiments”, 6th International Conference, Coatings for Aerospace and Automotive Industries, Toronto, Ontario, October 20-22, (1999)
Q. Cui, S. Chandra and S. McCahan, “Boiling of water drops containing dissolved gases or solids”, International Mechanical Engineering Congress and Exposition, Nashville, Tennessee November 14-19 (1999)
(Invited Talk) J. Mostaghimi, M. Pasandideh-Fard, R.G. Azar, S. Chandra, Modelling of the formation of thermal spray coatings" Materials Research Society Meeting, Boston, Massachusetts, November 29-December 3 (1999)
I. Thomson, V. Pershin, S. Chandra, J. Mostaghimi, “Evaluating the performance of a new gas shroud attachment for plasma spraying”, 6th International Conference on Coatings for Aerospace and Automotive Industry, Toronto, Ontario, October 20-22 (1999)
M. Pasandideh-Fard, V. Pershin, I. Thomson, J. Mostaghimi and S. Chandra, “Splat morphology in thermal spray coatings: simulations and experiments, 6th International Conference on Coatings for Aerospace and Automotive Industry, Toronto, Ontario, October 20-22 (1999)
M. Pasandideh-Fard, M. Bussmann, S. Chandra and J. Mostaghimi, “Simulation of molten metal droplets impacting on a solid surface”, National Heat Transfer Conference, Albuquerque, New Mexico, August 15-17 (1999)
G. Gao and J. Mostaghimi, "Electron Energy Distribution Function in Atmospheric Radio Frequency Inductively Coupled Plasma", ISPC-14, Prague, Czech Republic, pp. 215-220, August 2-6, 1999
I. Thomson, V. Pershin, J. Mostaghimi, S. Chandra, “Thermal Spray Coating at the University of Toronto”, Materials and Manufacturing Ontario Partnerships '99, Toronto, Ontario, June 10 (1999)
M. Bussmann, S. D. Aziz, J. Mostaghimi, S. Chandra “Modelling the splash of a thermal spray particle”, Second Industry Workshop: Intelligent Processing of Materials for Thermal Spraying, Schenectady, New York, April 23 (1998)
J. Mostaghimi, S. Chandra, M. Bussmann and M. Pasandideh-Fard “Modeling of splat shapes in plasma coating process” 96th Annual Technical Forum of the Canadian Ceramic Society, Toronto, Ontario, February 15-17 (1998)
S. D. Aziz and S. Chandra, “Dynamics of molten metal droplets falling on a solid surface”, 50th Annual Meeting of the American Physical Society/Division of Fluid Dynamics, San Francisco, California, November 23-25 (1997)
J. Mostaghimi, S. Chandra and M. Ivanovic, “Mathematical modelling of HVOF thermal spray process”, 5th International Seminar on Coatings for Aerospace Industry, Toronto, Ontario, October 23-24 (1997)
V. Pershin, J. Mostaghimi and S. Chandra “Monitoring of HVOF thermal spray process”, 5th International Seminar on Coatings for Aerospace Industry, Toronto, Ontario, October 23-24 (1997)
M. Bussmann, S. Chandra, J. Mostaghimi, “A three-dimensional model of droplet impact” 5th International Seminar on Coatings for Aerospace Industry, Toronto, Ontario, October 23-24 (1997)
M. Pasandideh-Fard, R. Bhola, S. Chandra and J. Mostaghimi “Modelling molten droplet impact and solidification”, 5th International Seminar on Coatings for Aerospace Industry, Toronto, Ontario, October 23-24 (1997)
M. Bussmann, S. Chandra, J. Mostaghimi and H. N. Tran, “Modeling carryover droplet impact”, 47th Canadian Chemical Engineering Conference, Edmonton, Alberta, October (1997)
M. Bussmann, S. Chandra, J. Mostaghimi “Water droplet impact onto various surface geometries - experimental and numerical results” 49th Annual Meeting of the American Physical Society/Division of Fluid Dynamics, Syracuse, New York, November 24-26 (1996)
Y. M. Qiao and S. Chandra, “The effect of dissolving a surfactant in water sprayed on a hot surface”, Annual Conference on Fire Research, Gaithersburg, Maryland, October 28-31 (1996)
Y. M. Qiao and S. Chandra, “Foaming in boiling surfactant solution droplets”, Gallery of Fluid Motion, Meeting of the American Physical Society/Division of Fluid Mechanics, Atlanta, Georgia, Nov. 20-22 (1994)
Y. M. Qiao and S. Chandra, “The effect of adding surfactants to water drops evaporating on a hot surface” Spring Technical Meeting of the Combustion Institute, Canadian Section, Kingston, Ontario, May 10-13 (1994)
S. Chandra and C. T. Avedisian, “Collision of a droplet with a wall” 6th Annual Conference on Liquid Atomization and Spray Systems, Worcester, Massachusetts, July (1993)
P. Lindsey and S. Chandra, “A heat balance technique to measure the mass flow rate of water in trees”, 90th Meeting of the American Society of Horticultural Science, Nashville, Tennessee, July 24-29, (1993)
J. Buckel and S. Chandra, “Hot wire ignition of hydrogen/oxygen mixtures”, Spring Technical Meeting, Canadian Section: The Combustion Institute, Quebec City, Quebec, May 9-12, (1993)
J. Buckel and S. Chandra, “Ignition of hydrogen at high pressures”, presented at the Spring Technical Meeting, Canadian Section: The Combustion Institute, Edmonton, Alberta, May 11-13, (1992)
S. Chandra and C. T. Avedisian, “A photographic study of droplet impact on a hot surface”, presented at the Fall Technical Meeting, Eastern Section: The Combustion Institute, Orlando, Florida, Dec. 3-5, (1990)
S. Chandra and C. T. Avedisian, “Dynamics of droplet impact on a solid surface”, Gallery of Fluid Motion, Meeting of the American Physical Society/Division of Fluid Dynamics, Palo Alto, California, Nov.19-22, (1989)
S. Chandra, G.S. Jackson and C. T. Avedisian, “Experiments on the combustion of a droplet near a cold surface at low gravity”, presented at the 7th European Symposium on Materials and Fluid Sciences in Microgravity, Oxford University, U.K., Sep. 10-15 (1989)
S. Chandra and C. T. Avedisian, “The combustion of a droplet near a cold surface”, presented at the Fall Technical Meeting, Eastern Section: The Combustion Institute, Clearwater Beach, Florida, Dec. 5-7 (1988).
R. Ghafouri-Azar, J. Mostaghimi, S. Chandra, “Modeling development of residual stresses in thermal spray coatings”, Computational Materials Science, 35, pp. 13-26 (2006).
J. Mostaghimi, S. Chandra, R. Ghafouri-Azar, A. Dolatabadi, “Modeling thermal spray coating processes: a powerful tool in design and optimization”, Surface and Coatings Technology, 163-164, pp. 1-11, (2003).
A. Dolatabadi, J. Mostaghimi, and V. A. Pershin, “Effect of a Cylindrical Shroud on Particle Conditions in High Velocity Oxy-Fuel (HVOF) Spray Process”, International Journal Science and Technology of Advanced Materials, 3, pp. 246-255, 2002.
I. Thomson, V. Pershin, J. Mostaghimi and S. Chandra, “Experimental Testing of a Curvilinear Gas Shroud Nozzle for Improved Plasma Spraying”, Plasma Chemistry and Plasma Processing,21, No. 1, pp. 65-82, 2001.
M. Jankovic, J. Mostaghimi and V. Pershin, "Design of a New Nozzle for DC Plasma Spray Guns with Improved Spraying Parameters", Journal of Thermal Spray, 9, p.114-120, 2000.
M. Jankovic and J. Mostaghimi, "Thermally Induced Measurement Error by a Water-Cooled Enthalpy Probe",Plasma Chemistry and Plasma Processing,18, pp.53-71, 1998.
M. Jankovic and J. Mostaghimi, "A New Nozzle Design for DC Plasma Spray Guns," Plasma Chemistry and Plasma Processing, Vol. 15, No. 4, pp 607-628, 1995.
J. Mostaghimi, M. Pasandideh-Fard and M. Jankovic, "Modelling of DC Plasma Spraying Operation Including Particle Impaction and Solidification," Heat and Mass Transfer under Plasma Conditions, P. Fauchais, ed., Beggel House, New York, pp 493-506, 1995.
M. Jankovic, J. Mostaghimi and J.O. Noga, "Mathematical Modelling in Thermal Plasma Spraying," Developments and Applications: Ceramics and New Metal Alloys, R.A.C. Drew and H. Mosthagaci, eds., pp 487-501, 1993.
Z. Njah, J. Mostaghimi, M. Faghri and M.I. Boulos, "Numerical Study of 3-D Mixing of a Cold Jet with a Transverse Plasma Stream", Int. Journal of Heat and Mass Transfer36, pp. 3909-3919, 1993.
REFEREED CONFERENCE PROCEEDINGS
L. Chen, J. Mostaghimi, L. Pershin, "Numerical Simulation of a DC Plasma Torch with Long Arc Length", 17th International Symposium on Plasma Chemistry (ISPC-17), (2005)
A. Dolatabadi, J. Mostaghimi, M. Ivanovic, “A Fully Eulerian Approach to High Speed Particle-Laden Flows”, Proceeding of the 4th International Conference on Multiphase Flow (ICMF 2001), May 2001, New Orleans, LA, USA.
A. Dolatabadi, J. Mostaghimi, M. Ivanovic, “Modeling All Speed Particle-Laden Flows Using a Fully Eulerian Approach”, Proceeding of the 9th Annual Conference of the CFD Society of Canada, May 2001, Waterloo, Ontario, Canada.
A. Dolatabadi, J. Mostaghimi, M. Ivanovic, “A Fully Eulerian Approach to Particle-Laden Compressible Flows”, Proceeding of the International Mechanical Engineering Congress & Exposition (IMECE 2000), November 2000, Orlando, FL, USA, HTD-Vol. 366-4, pp 225-230.
A. Dolatabadi, J. Mostaghimi, M. Ivanovic, “Numerical Modeling of Particulate Two-Phase Flow in the High Velocity Oxy-Fuel (HVOF) Thermal Spray Process”, Proceeding of the 8th Annual Conference of the CFD Society of Canada, June 2000, Montreal, Quebec, Canada, pp 797-804.
A. Dolatabadi, J. Mostaghimi, M. Ivanovic, “Numerical Modeling of Particle Laden Flow in HVOF Torch with Gas Shroud”, Proceeding of the 1st International Thermal Spray Conference (ITSC 2000), May 2000, Montreal, Quebec, Canada, pp 105-113.
I. Thomson, V. Pershin. J. Mostaghimi and S. Chandra, "Experimental validation of a curvilinear nozzle design for improved dc plasma spraying," Proceedings of UTSC'99, pp 452-457, Düsseldorf, Germany, March 17-19, 1999. PDF (0.2 Mb)
V. Pershin, J. Mostaghimi, S. Chandra, and T.W. Coyle, "A gas shroud nozzle for HVOF spray process," Proceedings of the 15th International Thermal Spray Conference, pp 1305-1308, Nice, France, May 25-29, 1998.
Yanguang Shan, J. Mostaghimi, “Modeling dense liquid sprays in radio frequency inductively coupled plasmas”, Plasma Chem. Plasma Process, Vol. 25, pp193-214 (2005).
Yanguang Shan, J. Mostaghimi, “Numerical simulation of aerosol droplets desolvation in a radio frequency inductively coupled plasma”, Spectrochim. Acta Part B, Vol. 58, pp 1959-1977 (2003).
K.C. Paul, T. Ishigaki, J. Mostaghimi and T. Sakuta, “Non-equilibrated Situations of Pulse Modulated Ar-H2 and Ar-N2 Thermal Plasmas at Atmospheric Pressure”, Journal of Applied Physics, accepted, March 2003.
K. C. Paul, J. Mostaghimi, T. Ishigaki, and T. Sakuta, “Transient Response of the Radio Frequency Inductively Coupled Plasma for Pulse Modulation”, Plasma Chemistry Plasma Processing,21, No. 3, pp. 371-400, 2001.
J. Mostaghimi, K.C. Paul, T. Sakuta, "Transient Response of the Radio-Frequency Inductively Coupled Plasma to a Sudden Change in Power",J. Applied Phys., 83, pp.1898-1908, 1998. PDF (243 kb)
H. Bastani-Parizi and J. Mostaghimi, "Chemical Kinetic Calculations of the Gas Phase Chemistry in Atmospheric Pressure Microwave Plasma-Assisted Chemical Vapour Deposition of Diamond", Int. J. Modelling & Simulation, 18, pp.16-25, 1998.
M. Cai, D.A. Haydar, A. Montaser, J. Mostaghimi, "Computer simulation of argon-nitrogen and argon-oxygen inductively coupled plasma", Spectrochimica Acta, vol. 52B, p. 369, 1997. PDF(1.0 Mb)
J. Kim, J. Mostaghimi, R. Iravani, "Performance Analysis of a Radio-Frequency Induction Plasma Generator Using Nonlinear State-Space Approach", IEEE Transactions on Plasma Science, Vol. 25, No. 5, Oct. 1997.
M. Cai, A. Montaser, J. Mostaghimi, "A two-temperature model for the simulation of atmospheric-pressure helium ICPs", Applied Spectroscopy, 49, pp. 1390-1402, 1995.
C. Ming, P. Proulx, M. Boulos and J. Mostaghimi, "Mathematical Modelling of High-Power Transferred Arcs", J. Appl. Phys., 76, 7757-7767, 1994.
M. Cai, A. Montaser, J. Mostaghimi "Computer Simulation of Atmospheric-pressure helium inductively coupled plasma discharges", Spectrochimica Acta, vol. 40B, p789, 1993.
P. Proulx, J. Mostaghimi and M. Boulos, "Radiative Energy Transfer in Induction Plasma Modelling", Int. Journal of Heat and Mass Transfer ,34, pp. 2571 2579, 1991.
P. Proulx, J. Mostaghimi and M. Boulos, "Loading and Radiation Effects in Plasma Jet Modelling", Colloque de physique ,Colloque C5, Supplément au no 18, Tome 51, pp. 263 270, 1990.
J. Mostaghimi and M. Boulos, "Effect of Frequency on Local Thermodynamic Equilibrium Conditions in an Induction Coupled Argon Plasma at Atmospheric Pressure", Journal of Applied Physics, 68, pp. 2643 2648, 1990.
G.Y. Zhao, J. Mostaghimi, M.I. Boulos, "The Induction Plasma Reactor. Part I: Equilibrium Model", Plasma Chemistry and Plasma Processing, vol. 10, p133, 1990.
G.Y. Zhao, J. Mostaghimi, M.I. Boulos, "The Induction Plasma Reactor. Part II: Kinetic Model", Plasma Chemistry and Plasma Processing, vol. 10, p150, 1990.
J. Mostaghimi, M.I. Boulos, "Two-Dimensional Electromagnetic Field Effects in Induction Plasma Modeling", Plasma Chemistry and Plasma Processing, vol. 9, p25, 1989.
P. Yang, R.M. Barnes, J. Mostaghimi, M.I. Boulos, "Application of a Completely Two-Dimensional Model in Simulation of Analytical ICP Discharge", Spectrochimica Acta, vol. 43B, p4178, 1989.
M. Dostie, J. Mostaghimi, M. Dostie, J. Jurewicz, "Analysis of an RF Plasma Torch with Permeable Ceramic Wall", Canadian J. Chem. Eng., vol. 67, p.929, 1989.
K. Etemadi, G.Y. Zhao and J. Mostaghimi, "Impact of Cathode Evaporation on a Free Burning Arc", Journal of Applied Physics, 22, pp. 1692-1696, 1989.
J. Mostaghimi, M. El-Hage and M. Boulos, "A Turbulent Flow Model for the RF Inductively Coupled Plasma", Journal of Applied Physics, 65, pp. 4178-4185, 1989.
J. Mostaghimi, P. Proulx and M. Boulos, "A Two?Temperature Model of the Inductively Coupled R.F. Plasma", Journal of Applied Physics, 61, pp. 1753-1760, 1987.
P. Proulx, J. Mostaghimi and M. Boulos, "Heating of Powders in an R.F. Inductively Coupled Plasma Under Dense Loading Conditions", Plasma Chemistry and Plasma Processing ,7 , pp. 29-52, 1987.
P. Proulx, J. Mostaghimi and M. Boulos, "Plasma?Particle Interaction Effects in Induction Plasma Modelling Under Dense Loading Conditions", International Journal of Heat and Mass Transfer, 28, pp. 1327-1336, 1985.
J. Mostaghimi, P. Proulx and M. Boulos, "An Analysis of the Computer Modelling of the Flow and Temperature Fields in an Inductively Coupled Plasma", Journal of Numerical Heat Transfer, 4, pp. 184-201, 1985.
J. Mostaghimi, P. Proulx and M. Boulos, "Computer Modelling of the Emission Patterns for an ICP Spectrochemical Torch", Spectrochimica Acta, 40B, pp. 153-166, 1985.
J. Mostaghimi, P. Proulx and M. Boulos, "Parametric Study of the Flow and Temperature Fields in an Inductively Coupled Plasma Torch", Plasma Chemistry and Plasma Processing, 4, pp. 199-217, 1984.
J. Mostaghimi and E. Pfender, "Effect of Metallic Vapour on the Properties of an Argon Plasma", Plasma Chemistry and Plasma Processing, 4, pp. 129-139, 1984.
J. Mostaghimi and E. Pfender, "Measurement of Thermal Conductivity of Soils", Wärme?Und Stoffübertragung, 13, pp. 3?9, 1980.
Yanguang Shan, J. Mostaghimi, “Effects of the spraying parameters on the evaporation of the spray in radio frequency inductively coupled plasmas”, Proceeding of 17th International Symposium on Plasma Chemistry, Toronto, Canada, August, 2005.
Yanguang Shan, J. Mostaghimi, “Modeling liquid sprays in inductively coupled plasmas”, Proceeding of the 3rd Asia-Pacific International Symposium on the Basic and Application of Plasma Technology, Dec 2003, Taiwan, China.
Yanguang Shan, J. Mostaghimi, “Prediction of droplets desolvation in a radio frequency inductively coupled plasma”, Proceeding of the 16th International Symposium on Plasma Chemistry, Jun 2003, Taormina, Italy.
Yanguang Shan, J. Mostaghimi, “Modeling of transport and evaporation of liquid droplets sprayed into radio frequency inductively coupled plasmas”. Proceeding of the International Thermal Spray Conference, May 2003, Orlando, Florida, USA.
J. Mostaghimi, Yanguang Shan, “Behavior of liquid sprays in a radio frequency inductively coupled plasma”. The International Symposium on the Reactivity of Solids, Nov 2003, Kyoto, Japan. (Invited talk)
J. Mostaghimi, Yanguang Shan, “Modeling liquid sprays in inductively coupled plasmas”, The 3rd Asia-Pacific International Symposium on the Basic and Application of Plasma Technology, Dec 2003, Taiwan, China. (Invited talk)
Yanguang Shan, J. Mostaghimi, “Prediction of liquid spray evaporation in radio frequency inductively coupled plasmas”. The 55th Gaseous Electronics Conference, Oct 2002, Minneapolis, Minnesota, USA. (Abstract)
Yanguang Shan, J. Mostaghimi, “Modeling of injection of liquid spray into radio frequency inductively coupled plasmas”. Gordon Research Conference on Plasma Processing Science, Jul 2002, Tilton, New Hampshire, USA. (Poster)
H.R. Salimi Jazi, J. Mostaghimi, T. Coyle, S. Chandra, C.Y. Lau, L. Rosenzweig, E. Moran, “Measuring Substrate Temperature Variation During Application of Plasma Sprayed Zirconia Coatings”, Journal of Thermal Spray Technology, Submitted Feb. 2007.
H.R. Salimi Jazi, J. Mostaghimi, T. Coyle, “Grain Growth and Pore Elimination in the VPSF Ti-6Al-4V Alloy", Metallurgical and Materials Transactions A, in press Oct. 2006.
H.R. Salimi Jazi, J. Mostaghimi, T. Coyle, “Vacuum Plasma Spraying: A New Concept for Manufacturing Ti-6Al-4V Structures”, JOM, pp 50-56, Sept. 2006.
H.R. Salimijazi, T.W. Coyle, J. Mostaghimi, and L. Leblanc, “Microstructure of Vacuum Plasma Sprayed Boron Carbide”, Journal of Thermal Spray Technology, 14(3), pp 362-368, Sept. 2005.
H.R. Salimijazi, T.W. Coyle, J. Mostaghimi, and L. Leblanc, “Microstructure and Failure Mechanism in As-Deposited Vacuum Plasma Sprayed Ti-6Al-4V Alloy”, Journal of Thermal Spray Technology, 14(2), pp 215-223, June 2005.
Y. Heichal, S. Chandra and E. Bordatchev, “A Fast-Response Thin-Film Thermocouple to Measure Rapid Surface Temperature Changes”, Experimental Thermal and Fluid Science, 30, pp. 153-159 (2005).
V. I Pershin, M. Lufitah, S. Chandra and J. Mostaghimi, “Effect of substrate temperature on adhesion strength of plasma-sprayed nickel coatings”, Journal of Thermal Spray Technology, 12, pp. 370-376 (2003).
H.R. Salimi Jazi, J. Mostaghimi, T. Coyle, V. Pershin, L. Rosenzweig, and E. Moran, “Effect of Substrate Temperature and Droplet Characteristics on Plasma Sprayed Zirconia Splats”, 2006 International Thermal Spray Conference & Exposition, May 15-18, 2006, Seattle, Washington, USA.
R. Soltani, T.W. Coyle, and J. Mostaghimi, Thermomechanical behaviour of Nanostructured Plasma Sprayed Zirconia coatings, International Thermal Spray Conf., 15-18 May 2006, Seattle, WA, USA.
R. Soltani, T.W. Coyle, J. Mostaghimi, “Creep Behavior of Plasma Sprayed Thermal Barrier Coatings”, 30th International Conf. on Advanced ceramics and composites, Jan. 23-28, 2006, Cocoa Beach, Florida, USA.
E. Garcia, Z. B. Zhang, T.W. Coyle, L. Gan, R. Pilliar “Hydroxyapatite Coatings Produced by Plasma Spraying of Organic Based Solution Precursor” Accepted for publication in Ceramic Engineering and Science Proceedings (2006).
E. Garcia, Z. B. Zhang, T.W. Coyle, L. Gan, R. Pilliar "Plasma Spraying of Hydroxyapatite Coatings Obtained from Two different Precursors” accepted for publication “Proceedings of the International Thermal Spray Conference & Exposition” Seattle, Washington, EEUU, 15-18 May 2006.
E. García, T.W. Coyle “Fuel Cell Interconnecting Coatings Produced by Different Thermal Spray Techniques" Accepted for publication in Ceramic Engineering and Science Proceedings (2006).
E. García, T.W. Coyle "Thermal Spray Deposition of Fuel Cell Interconnect Material” accepted for publication “Proceedings of the International Thermal Spray Conference & Exposition” Seattle, Washington, EEUU, 15-18 May 2006.
H. Samadi, T. W. Coyle, “Design of Alternative Multilayer Thick Thermal Barrier Coatings”, ICACC 2006, Florida, USA (2006)
H. Samadi, T. W. Coyle, “Modeling of Multilayer Thick Thermal Barrier Coatings”, ITSC 2006, Seattle, WA, USA (2006). H. Samadi, T. W. Coyle, “Mapping Deposition Parameters and Microstructures of Plasma Sprayed Spinel”, ITSC 2006, Seattle, WA, USA (2006).
H.R. Salimijazi, M. Raessi, T.W. Coyle, and J. Mostaghimi, “Numerical Simulation and Experimental Evaluation of Solidification Behavior of Vacuum Plasma Sprayed Ti-6Al-4V Single Droplet”, 17th International Symposium on Plasma Chemistry, 7-12 Aug. 2005, Toronto, Canada.
H.R. Salimijazi, F. Azarmi, T.W. Coyle, and J. Mostaghimi, “Study of the Relationship between the Young’s Modulus and Microstructure of Vacuum Plasma Sprayed Boron Carbide”, 29th International Conference on Advanced Ceramics and Composites, American Ceramic Society, pp. 235-244, Jan. 2005, Florida, USA.
H.R. Salimijazi, T.W. Coyle, and J. Mostaghimi, “Relationship between Elastic Modulus and Microstructure in Vacuum Plasma Sprayed Structures”, ITSC 2005, May 2005, Basel, Switzerland.
R. Soltani, M.A. Golozar, T.W. Coyle, J. Mostaghimi, “Wear Behavior of Nanostructured and Conventional Y-PSZ Coatings”, Conference of Metallurgists , 21-24 August 2005, Calgary, Alberta, Canada.
R. Soltani, M.A. Golozar, T.W. Coyle, J. Mostaghimi, “Wear Behavior of Nanostructured and Conventional Y-PSZ Coatings”, 17th International Symposium on Plasma Chemistry, 7-12 August 2005, Toronto, Canada.
R. Soltani, T.W. Coyle, and J. Mostaghimi, Thermomechanical behaviour of bimodal structured 7-8 wt% YSZ thermal barrier coatings, International Thermal Spray Conf., 2-4 May 2005, Basel, Switzerland.
R. Soltani, E. Garcia, A.De Pablos, M.I. Osendi, P. Miranzo, T.W. Coyle, J. Mostaghimi, “Thermal behavior of TBCs and stell/TBCs structure”, 29th International Conf. on Advanced ceramics and composites, Jan. 23-28,2005, Cocoa Beach, Florida, USA.
R. Soltani, H. Samadi, E. García, T.W. Coyle "Development of Alternative Thermal Barrier Coatings for Diesel Engines” SAE Technical Papers Nº 2005-01-0650, SAE 2005 World Congress & Exhibition, April 2005, Detroit, MI, USA.
E. García, R. Soltani, T.W. Coyle, J. R. Mostaghimi, A. De Pablos M. I. Osendi, P Miranzo "Thermal Behaviour of Thermal Barrier Coatings and Steel/Thermal Barrier Coating Structures” Ceramic Engineering and Science Proceedings 26 (3) 137-144, (2005).
R. Soltani, H.Samadi, E. Garcia & T.W. Coyle “Development of Alternative Thermal Barrier Coatings for Diesel Engines”, SAE World 2005, Detroit, MI, USA (2005).
H. Samadi, T. W. Coyle “Alternative Thermal Barrier Coatings for Diesel Engines”, 5th Congress of Iran Ceramic Society, Tehran, Iran (2004).
H.R. Salimijazi, T.W. Coyle, J. Mostaghimi, and L. Leblanc, “Characterization of Vacuum Plasma Sprayed Boron Carbide”, Thermal Spray 2004: Advancing in Technology and Application, ITSC, May 2004, Osaka, Japan.
R. Soltani, T.W. Coyle, and J. Mostaghimi, “Thermomechanical behaviour of bimodal structured thermal barrier coatings”, International thermal spray conf., 10-12 May , 2004, Osaka, Japan.
H.R. Salimijazi, T.W. Coyle, J. Mostaghimi, and L. Leblanc, “Structure and Mechanical Properties of VPS Ti-6Al-4V”, International Symposium on Plasma Chemistry, ISPC, Jun. 2003, Taormina, Italy.
H.R. Salimijazi, T.W. Coyle, J. Mostaghimi, and L. Leblanc, “Near-Net Shape Forming of Ti-6Al-4V alloys by Vacuum Plasma Spray Forming”, Thermal Spray 2003: Advancing the Science and Applying the Technology, ITSC, May 2003, Florida, USA.
L. Leblanc, H.R. Salimijazi, J. Mostaghimi, and T.W. Coyle, “On Vacuum Plasma Spray Forming of Ti-6Al-4V”, Thermal Spray 2003: Advancing the Science and Applying the Technology, ITSC, May 2003, Florida, USA.
R. Soltani, T.W. Coyle, and J. Mostaghimi, “Wear resistance of nano-structured thermal barrier coatings”, International thermal spray conf., 5-8 May 2003, Orange County Convention Center, Orlando, Florida, USA.
